Floyd Rose trem question (KH-2)

[Aeroscopic]

Hi guys,

I posted this on the older board but there was no clear answer on my problem so I'm gonna try it here again :)

So I have a KH-2, which has a Floyd (duh :p) it's my first guitar with a Floyd...
What I want to know is how you can lock the tremolo arm so that it doesn't swirl about? I just want it to be moveable but to stay in place when I let it go...

Thanx for any help, it's greatly appreciated

[ESPNAZI]

tighten it!!
or super glue it
or do what my friend did and tie it with rubber bands.

[Aeroscopic]

you gotta be kiddin me :p
I tighten the screw to it as tight as I can but the damn thing always swirls everywhere

[flakelorenz]

you gotta be kiddin me :p
I tighten the screw to it as tight as I can but the damn thing always swirls everywhere

Maybe the thread off the arms worm away. Try another arm. You can probablies buy one cheap from any guitar shop, order one or just try one that you can borrow for a few seconds to make sure it's the arm and not the bridge...

[Boinz]

you probably have to buy another arm cause the thread might be gone.

[Mister Guitar Himself]

or do what my friend did and tie it with rubber bands.



how do you mean?

[Boinz]

if im imagining correctly, maybe he means put rubber bands around the piece of the tremolo that goes inside the ...hole.

[KH Guitar Freak]

You can tighten the screw under the trem arm stud, just open up your trem cavity and there's an allen screw under the stud, tighten that and see if that helps first...