EMG install help

[klhoskins]

I have an LTD SC-500 with the H/H/S setup and want to replace the Duncan Designed pickups with EMG's. I was planning on putting in an 81, an 85 and an SA at the neck. The 81/85 set comes with all the parts and cables to hook em up but how would I wire in the SA. I have never messed with the electronics in any of my electrics so I'm a bit of an idiot on this. Would I just wire everything up exactly the same as the current pickup setup and if so, where would the battery come in? If anyone could help me out or point me in the right direction, it would be appreciated.

Thanks...

[klhoskins]

I guess I should have checked on EMG's site first right!!! Doh!

:cool:

http://www.emgpickups.com/downloads/wiringdiagrams/EMG-9-Basic-Wiring-Diagrams.pdf

[Metalmilitia306]

you could also just have a tech wire it for you. if not then just follow the diagram, it's pretty straight foward.

[skinnyb82]

The wiring diagrams that EMG provides are pretty explicit. Just make sure you have confidence in your ability to solder, otherwise just take it to a tech. I popped a pair of EMGs into my EXP-200 in like an hour and I didn't really know what I was doing.