The Mock-Up Thread

[Angel Of Death181]

Here we go again, mod if you can please make this a stickey

[CAPTAIN SARG]

ok i have waited a long time for this so could someone please make this. my request is an ibanez iceman 400 body. quilted maple top with see thru black cherry finish with black binding. emg pickups 81 and 85 ofr in black with a black master volume and a black 3 way toggle in the postion as on a les paul.

neck: 25.5 scale 24 frets large diamond inlays in peral, ebony fretboard black binding,

headstock: f series shape black machine heads with ofr locking nut and a quilted maple top with finish to match body.

also i would like this also as a seven string with same specs and the 7 string tremblo by floyd . thanks alot for your time

[ShreddyMcFunTits]

Manic you still have my V to do.

[GIO]

i would like a v see thru black with the emgzorz, reverse hadstock arrowhead inlays and a floyd rose also 24 frets

not too hard

[The Jeeves 3000]

z0mg n0t t3h 3mgzorz

[BlackWidowESP]

I bet viperplayer's gonna request a viper with a reverse pointy headstock and EMGzorz

[The Jeeves 3000]

he failed at that

[rockinhockey]

is there even anyone who does mockups anymore?

[The Jeeves 3000]

I tried i failed

[val]

Here is mine!

Guitar or Bass:
Guitar
Right or Left Handed: Right Handed
Scale Length: 25.5"
BODY SPECIFICATIONS
Body Shape: M
Construction: Bolt-on
Material: Alder
Quilted Maple Top: No
Flame Maple Top: No
Binding: No
Binding Color: N/A
Routing: Front
Pickup Configuration: Bridge: Hum Middle: N/A Neck: Hum
Finish: Black
Custom Graphic: No
NECK SPECIFICATIONS
Headstock Shape: ESP Pointed
Reverse: Yes
Tilt: Yes
Headstock Finish: Black
Neck Finish: Natural Gloss
Fingerboard: Maple
Number of Frets: 24
Fret Size: Extra Jumbo
Inlays: Arrowhead
Custom Inlays: No
ESP Inlay at 12th Fret: No
Fingerboard End: Square
Fingerboard Binding: No
Headstock Binding: No
Binding Color: N/A
Nut: Locking
Nut Width: 1 11/16"
Neck Contour: Thin "U"
Headstock Logo: ESP Custom
PART SPECIFICATIONS
Hardware Color: Black
Bridge System: Original Floyd Rose Locking Tremolo System
Recessed Tremolo: Yes
Pickguard: Yes
Pickguard Color: Mirror
Tuning Machines: Deluxe Gotoh
Input Jack: Side of Body
Pickups: EMG
Pickup Model: Bridge: 81 Middle: Neck: 81
Control Pattern: Volume/Volume/Tone/3-way Switch

[angelzdecay]

ninja with floyd

[Trogdor]

How bout the new blue and green EC finishes on some different bodies?

I'd like to see the green quilt on a V with gold hardware and white binding on neck/hs

[ESPManiac]

lol, i didnt even realise that ther was a new board...


Was wondering why the yuku was so slow :P

http://i16.photobucket.com/albums/b19/espmaniac/forestgtallendercopy.jpg

[ESPManiac]

oh yea, whoever i made that for needs to tell me what to fix

[ShreddyMcFunTits]

It needs to be a white gibby V with fullshread :p

[Sirkenzington]

oki,this would be pretty cool!

Forest-Gt with EVH 5150 graphics
string through, 2 emg's
1 vol and 1 tone, and 3 way toggle switch.
ebony neck, no inlays, matching headstock

[Kincade]

ninja with floyd

But that already exists in real life. Andy Sneap owns it.

[ShreddyMcFunTits]

It still doesn't mean he can't ask for a mockup of one.

[Kincade]

It still doesn't mean he can't ask for a mockup of one.

Just seems really redunant to ask someone for a mock-up, when there's multiple real life close up pictures of that exact guitar floating around.

[Mister Guitar Himself]

well, I've asked it 2 or 3 times on the old boardz, but never got mine done so...here it goes:)

I'd like a mock-up of a SV Standard

body: Alder
body finish: black with cream pinstripes
Neck: 3 pc hard maple natural finish
joint: neck-thru
neck shape: extra thin flat
headstock: black reversed jackson style with ESP Custom logo on it
binding: cream binding on neck and headstock
fretboard: ebony or rosewood
inlay: cream sawtooth inlay
frets: 24 XJ
nut: original floyd rose locking nut/ 43mm
bridge: original floyd rose
tuners: sperzels locking
pickups: EMG 81 bridge; EMG 85 neck
hardware: 3 way toggle; 1 volume knob; deep dish on the side of body (like Alexi)
hardware color: gold

cheers, :D

[shakeESP]

Oh, well if you have a spare moment.

Could somebody mock me up a 7 string sea bass with a floyd rose trem in black, along with 24 frets, no fretboard required! Oh and an EMG 81 in the....bridge, yeah?

-Chris

[val]

WOW!! My custom guitar(on page 1) will cost $2799 w/case! Thats....50-175 dollars cheaper!

[Rex Rocker]

could someone mock me up a Black Dahlia Murder V (you know, the one with asymetrical wings), but with a tailpiece bridge like the one on the Gibby Melody Makers or the PRS SE's, chrome hardware and a headstock like on an ESP MX-250? white binding on the neck and headstock, please... oh, and ebony board! just one pickup selector and a volume knob... and EMGzorz with chrome pickup rings, please...

[ForYourDarkness]

http://i56.photobucket.com/albums/g191/AnTI--HeR0/ESPCustomMichaelAmottNinja.jpg

http://i56.photobucket.com/albums/g191/AnTI--HeR0/CustomESPMX-250II.jpg

http://i56.photobucket.com/albums/g191/AnTI--HeR0/CustomESPGusGSignature.jpg

Just some ones I've made, minus the Explorer, that's based on blackmachine's so main credit goes to him.

Also, that Explorer is my DREAM guitar.

[Dick Tater]

Could I get a Dean V in Cherry Burst (flame maple) with Cream binding (single layer; body/neck/headstock) with the VMNT headstock (black). Split Pearl Block inlays on Rosewood fretboard. Gold hardware (stop-tail piece; normal one not the Dean one) and gold logo, gold covered humbuckers.

Headstock:
http://deanguitars.com/dean_winter_07/dave_mustaine_vmnt1_en.htm

Body and Finish:
http://deanguitars.com/timecapsule/images/inventoryv.jpg

Inlays:
http://www.gibson.com/Files/images/lpsu_hs.jpg

[GIO]

:evil:mad:

[ChrisDegarmoFreak]

Heres one that i made for myself a quite a while ago

http://i5.photobucket.com/albums/y156/jedimasterkyle/Dream_Guitars/Burst_E.png

[darkalone]

I have a pretty nutty request for someone if they can pull it off...

Fender Performer body
http://www.diamondstrings.com/FEN%20perfomers3.jpg

But with no pickguard, dual EMGs, a different headstock (maybe the F headstock, AX maybe?), 22 frets, and a Tune-O-Matic and tailpiece.

I don't care about color right now. Just the guitar. I have a weird attraction to it.

[AlexiWildchild]

Could someone please do two mockups for me?

The Alexi RV in white, with a maple fretboard, black binding and black Sawtooth inlays. And the black RV also with a maple fretboard, black binding and black Scythe inlays. :)

[gibsonexp]

http://i80.photobucket.com/albums/j181/SlipknoTXXIV/ESPCustomHermzo.jpg

I'd like a 7 string version of this with 27 frets slanted and single coil neck pickup like the kiko, rosewood fretboard, no inlays, and baritone scale, thanks. Oh, no neck binding, and I'd like open coil pickups where you can see the pole pieces.

[efanny]

Baritone exp, black, white gibbo explorer style pickguard, emg 81 and 60, one singal volume and no pickup selector switch (why? i have no idea), ebony board w/ diamond inlays, chrome hardware, sperzel locking machine heads, string thru body

in two versions: one with a hocky stick style one (like one hetfields esp's, i dunno what they're called) and one with reverse esp six in a line

i would do it myslef but i am shit with computers, which is the reason i havent recorded demos of my songs for my band to listen to yet {:S

[ForYourDarkness]

Man...

Everyone is I WANT I WANT...

Just do what I did,

Download The GIMP or a *legal* copy of PhotoShop and learn to make your own.

Sheesh.

[AsherTKK]

Hey ESP Maniac... thanks for the forest gt 7, its just missing the controls... I'd like the layout to be like the m2 ctm, and the inlays to be bats like on jason miller's forest...

thanks mate...

love yr work

[Dingbat-Walabi]

whos incharge of this? is blackmachine still here?

[ShreddyMcFunTits]

Black Machine is here but he stopped making alot of mockups a wile ago. He also stopped posting too.

Maniac, you finished with my V yet?

If so I have another one if you or anyone else wants it:

EX body
27'' Scale
Natural finish
Koa top
ebony fretboard
24 frets
no inlays
reverse pointed headstock
string-thru
Gold hardware
EMG 81 in bridge

[ESPManiac]

Why u keep on asking for so many bloody mockups individuo?

I am fine with doing them, but soooo many :P

[ShreddyMcFunTits]

Why u keep on asking for so many bloody mockups individuo?

My gas keeps shifting.

[twistedblack69]

val
http://i9.photobucket.com/albums/a65/MustaineJr89/Guitar%20Mockups/MapleKH4.jpg

[Dingbat-Walabi]

whos incharge of this? is blackmachine still here?

__________________________

[twistedblack69]

angelzdecay
http://i9.photobucket.com/albums/a65/MustaineJr89/Guitar%20Mockups/NinjaFloydcopy.jpg

[GIO]

:mad:

[Casey K]

if anyone could do a roope guitar same specs but 2 hums a dime in the bridge and another duncan in the neck gold floyd non reverce banana head black flame maple body with natrul flame maple binding on the hole guitar and a walnut (laminent) raceing stripe going down the center of the body no fret markers eather....
casey k

[blackmachine]

I'm still here.. just figure out how to run Photoshop on my Ubuntu Linux.:)
Sirkenzington.. Your Forest GT..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomSirkenzington.jpg

[ShreddyMcFunTits]

Hey black, good to have you back. There's less of us here at the moment so I don't think it'll be so hectic.

You might even find time to play your gutiars.

Could you do the EX I mentioned before please black?

[Dingbat-Walabi]

Alexifanboiy your rr:
http://i111.photobucket.com/albums/n124/blackmailtheworld/Untitled-3.jpg










hey black welcome back, i have 2 requests for you
if you can, can you also show pics of the back of these guitars, thnx
#1
shape: sv
finish: black with blood red pinstripes
hardware: black
binding: white on neck and headstock
logo: esp
headstock: esp pointed
pickups: seymour duncan black out in bridge
electronics: gain booster switch above bottom stripe
neck: maple, satin
fingerboard: ebony
body: alder
bridge: OFR
pickup ring: black
Tuners: Gotoh
extras: red LED lights on side of neck if possible
inlay: none
controls: 1 volume

#2

shape: telecaster w/ sharper bottom horn if possible, if not just keep the horn
finish: see-thru blue, flamed maple top
neck: maple satin
fingerboard: ebony
binding: white, NECK and HEADSTOCK and BODY
pickup: seymour duncan black out in bridge
bridge: OFR
hardware: Black
inlay: none
Headstock: Esp Pointed, see thru blue flamed maple
extras: Blue Led lights on side of neck if possible
pickup ring: black
tuners: gotoh
controls: 1 volume

[BloodJunkie]

Hey blackmachine:D

This is going to be an actual production model from Agile, but I really want to see what it will look like...

These are kurt's specs

EMG 707s
Mahogany Body
27" scale 5 piece maple neck-thu body construction
Ebony fretboard with no markers.
24 Extra Jumbo
Grover Die Cast tuners
String through body / tune-o-matic bridge like the current Septor 7
Volume & tone controls and a coil tap
Reverse Headstock
Uniform Neck Profile
black or blue flame(I don't care which one)

Thanks!

[blackmachine]

Mister Guitar Himself.. Your SV..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomMisterGuitarHimself.jpg

[darkalone]

Mr. Blackmachine, welcome back. Any chance of you taking a stab at my Fender Performer?

[blackmachine]

Blackmachine, welcome back. Any chance of you taking a stab at my Fender Performer?I can mock it for u if u can find me 2d pictures from the front of the guitar;)(hires image if u can find)

Dick Tater.. Your V..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomDickTater.jpg

[darkalone]

The best 2 pictures I could find. One is hi-res, but it's a bass. But the shape is what I'm concerned about, so it should be ok.

Hi-Res Bass (http://i122.photobucket.com/albums/o251/project_dc1/Forum/performer_hires.jpg)

Guitar (http://i122.photobucket.com/albums/o251/project_dc1/Forum/perfomer_guitar.jpg)

[N3rdAl3rt]

Dear blackmachine, this is my very first time asking for a mock up! it'd be cool if you can make this

Guitar or Bass:
Guitar
Right or Left Handed: Right Handed
Scale Length: 25.5"
BODY SPECIFICATIONS
Body Shape: M
Construction: Bolt-on
Quilted Maple Top: No
Flame Maple Top: No
Binding: yes
Binding Color: Black
Routing: Back
Pickup Configuration: Bridge: Hum Middle: N/A Neck: Hum
Finish: Snow White
Custom Graphic: No
NECK SPECIFICATIONS
Headstock Shape: ESP Pointed
Reverse: Yes
Tilt: Yes
Headstock Finish: Snow White
Neck Finish: Snow White
Fingerboard: Ebony
Number of Frets: 24
Fret Size: Extra Jumbo
Inlays: KH Skulls and Crossbones
Fingerboard End: Square
Fingerboard Binding: Yes
Headstock Binding: Yes
Binding Color: Black
Nut: Locking
Nut Width: 1 11/16"
Neck Contour: Extra Thin "U"
Headstock Logo: ESP
PART SPECIFICATIONS
Hardware Color: Black
Bridge System: Original Floyd Rose Locking Tremolo System
Recessed Tremolo: Yes
Pickguard: No
Pickguard Color: N/a
Tuning Machines: Gotoh
Input Jack: Side of Body
Pickups: EMG
Pickup Model: Bridge: 81 Middle: Neck: 81
Control Pattern: Volume/Volume/Tone/3-way Switch

thanks!

[JeanPaul du Vinnie]

I'd like both of the following strats with a matte black pickguard and black pickup covers and knobs and selector switch :
http://images.misupply.com/products/thumbs/Fender/226900.jpg
http://www.ooshop.es/images/0134600332.gif
thanks!

EDIT: nevermind, found some real life pictures of the same thing. :)

[Dick Tater]

Thanks BlackMachine!!!! That thing looks freakin' sweet man! Amazing job as always. :cool:

[ForYourDarkness]

Hey black, good to see ya' back

I was wonderin though,

If you could make this MX of yours I editted into a seven string with black binding?

Thanks man, I promise it'll be my only request, you can quote me on it :rollin



Srsly. :|

http://i56.photobucket.com/albums/g191/AnTI--HeR0/CustomESPMX-250II.jpg

[Total Eclipse]

Hey dudes.

Can someone make me an Eclipse Semi-Hollow like the one I have:

http://i158.photobucket.com/albums/t81/totaleclipse518/Guitarpix008.jpg

Only in black, w/ chrome hardware and EMG's?

Thanks! :D

[metalhobo]

Can somebody mock me up a a snow white MII with teh tone pros bridge and stop-tailpiece, with a maple fingerboard, teh EMGs, a volume pot that's not not too close to the bridge pup, and a matching reverse headstock?

[BlackWidowESP]

Guitar or Bass: Guitar

Right or Left Handed: Right
Scale Length: 25.5

BODY SPECIFICATIONS

Body Shape: Mirage
Construction: Neck Thru
Material: alder
Quilted Maple Top: no
Flame Maple Top: yes
Binding: no
Binding Color:
Routing: back
Pickup Configuration: Bridge:Hum Middle: Neck:SC
Finish:See-Thru Black
Custom Graphic:

NECK SPECIFICATIONS
Headstock Shape: ESP Pointy
Reverse: Yes
Tilt: Yes
Headstock Finish:Match Body
Neck Finish:Natural Satin
Fingerboard: Maple
Number of Frets: 24
Fret Size:XJ
Inlays: Arrowheads
Custom Inlays:

ESP Inlay at 12th Fret: Yes
Fingerboard End: Square
Fingerboard Binding:Yes
Headstock Binding: No
Binding Color: Black
Nut: Locking
Nut Width: 1 5/8
Neck Contour: Thin U
Headstock Logo: ESP

PART SPECIFICATIONS

Hardware Color:Chrome
Bridge System: Khaler

Recessed Tremolo: Yes
Pickguard: No
Pickguard Color:
Tuning Machines: Deluxe Gotoh
Input Jack: Side of Body
Pickups: SD
Pickup Model: Bridge:JB Middle: Neck:Alnico II Pro
Control Pattern:1 Volume knob-Push pull to toggle pickups

Pwetty Pwease:o

[twistedblack69]

Hey Black, did you paint the stripes on yourself on the EVH F, or use a pic?? I couldn't find a pic, so mine came out like this:

http://i9.photobucket.com/albums/a65/MustaineJr89/Guitar%20Mockups/FVanHalen.jpg

[Mister Guitar Himself]

thanks blackmachine!!!!!!!

[blackmachine]

Hey Black, did you paint the stripes on yourself on the EVH F, or use a pic?I paint it myself..:)

DA.. I've tried mock the performer.. because of its poor image quality.. it looks shitty|I. If u can find the image with white background maybe I can redo it.(hires)

ShreddyMcFunTits.. Your EX..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomIndividuo-6.jpg

[blackmachine]

Casey K.. Your RS..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomCaseyK.jpg

[PapaHett]

Blackmachine, your work is really awsome.

[someguy]

ESP RS, but the pointy one, not the rounded one.
Black beveled edges with a white flamed maple top.
Black Floyd, black hardware.
EMGs
Ebony fretboard with 'X' inlays, 2 at the 12th fret.
I kind of want to see one with the standard headstock (that looks kind of like a Dean)
but also one with an F headstock, the kind where it says ESP in the middle as opposed to the top.

[Rhymenocerous]

Good to see you back, blackmachine! As always, I have a request. :lol


Tele, figured bubinga top, matching headstock, ebony board, flamed maple binding on body neck and headstock, one with gold hardware, one with chrome, one with black, please. Little JB in the bridge, normal sized 59 in the neck. 22 frets, satin off-black pickguard with no white edges.



Thank you so much in advance.

[Rhymenocerous]

Also, CBS headstock, please!

[Dom1412]

I have a request.

Eclipse (US)
Cocobolo top
Maple neck and headstock
No inlays
EMGs
Black hardware

[darkalone]

Blackmachine, here's the original scan, and an outline I did myself in Photoshop.

Original scan (http://i122.photobucket.com/albums/o251/project_dc1/Forum/customidea.jpg)

Shape outline (http://s122.photobucket.com/albums/o251/project_dc1/Forum/?action=view&current=dc-custom1.jpg)

[Det Brinnande Röda]

A request! I know u'll do it once u get the time black and all other photoshoppers!

Body shape: SV

Finish: Solid black with a fat stripe of Red flame showing

Headstock: Horizon cockstock but a bit pointier if possible Fisnish: Red flame and one with black headstock

Black hardware string through bridge

2x duncan pups

pup selector and one vol (standard SV layout)

ebony board 24 frets and no inlays

neck and headstock binding: White

Thanks dudes!!!!

[blackmachine]

I'm sorry DA.. I guess your pics didn't help me either|I.. I may give another try if u are able to give me good image of performer.

Dingbat-Walabi.. Your request..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomDingbatWalabi.jpg

[efanny]

my exp's? is it 'cos i dont have my post count up? lol

take ur time really...

[Gian]

Hey DA, does these pics help?

http://i5.photobucket.com/albums/y173/alainlafrance/perf9.jpg

http://i5.photobucket.com/albums/y173/alainlafrance/perf1.jpg

http://i5.photobucket.com/albums/y173/alainlafrance/146215168diVgHU_ph.jpg

http://i5.photobucket.com/albums/y173/alainlafrance/perf11.jpg

[blackmachine]

Thanx for the image Gian..:)

DA.. Your Performer..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomDarkAlone-2.jpg

[darkalone]

Awesome!!! Now it's getting there!

Ok... Let's correct a few things...

-string-thru body, angled with the body curve
-3-way switch instead of the blade, and move the knobs further back

Then let's try a Silverburst finish, and a black finish with pearl pickguard.

Thanks Gian and Blackmachine!!!

[val]

Hey black machine could you make me a KH-2(bolt on) with a mirror pickguar or/and a mother of pearl pickguard.(and please no picks a a KH-4 ether) thanks!

[ESPVIPERCAMO]

make that a string threw

[Trogdor]

could you make me a V (DV8) with this finish (http://www.carvin.com/guitars-in-stock/big/98007b.jpg) (maybe a see-thru blue, too, if you feel like it
- no pickguard
- F headstock (or pointy reversed)
- ebony board with arrowhead inlays
- white binding on neck and hs
- string-thru bridge
- gold hardware and pickup rings
- dimarzio pickups

Thanks! :)

[blackmachine]

N3rdAl3rt.. Your MII..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomNerdAlert.jpg

[blackmachine]

JeanPaul du Vinnie.. Your Strat..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/FenderCustomJeanPaulVinnie.jpg

Edit: Forget to change bridge pickup, sorry

[blackmachine]

ForYourDarkness.. Your EXP..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomForYourDarkness.jpg

[blackmachine]

Total Eclipse.. Your EC..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomTotalEclipse-1.jpg

[Dom1412]

Well since the other one was a no-go, let's try this one.

KH-4, arrowhead inlays, HSH setup, FR bridge, black hardware, and the pickguard this color...

http://www.wdmusic.com/images_products/fender_strat_reg_pickguards_in_b27513.jpg

[blackmachine]

BlackWidowESP.. Your MII..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomBlackWidowESP.jpg

[Det Brinnande Röda]

That's pretty nice^ really like the arrowheads

[ForYourDarkness]

Thanks SOOOOO much black, It looks incredible.

Amazin' as always :rollin

[N3rdAl3rt]

wow thanks black machine, that looks AMAZING!

[ZephMan13]

Wow, mock-ups are being done now, seeeeeweet!

Could I possibly get:
Snow white M-II
NORMAL Pointed Headstock(not reverse)
Gold hardware(Floyd, tuners, etc.)
Skull n' Bones inlay on a maple fretboard
EMG in Hum/SC/Hum

[AsherTKK]

hey black machine welcome back...

i had maniac do me a forest gt on page 2... but its missing a few things...

can you help me out by say

darkening the bevels
adding inlays (the bat symbol from batman begins)
adding the esp logo on the headstock
adding the controls, m2 ctm layout

thanks alot dude...

[thelonegrey]

RIGHT FROM THE QUOTE
BODY SPECIFICATIONS
Body Shape: EC
Construction: Set-Thru
Material: Mahagony
Quilted Maple Top: No
Flame Maple Top: No
Binding: Top
Binding Color: Black
Routing: Back
Pickup Configuration: Bridge: Hum Middle: Hum Neck: N/A
Finish: Gunmetal Blue
Custom Graphic: No
NECK SPECIFICATIONS
Headstock Shape: EC
Reverse: No
Tilt: Yes
Headstock Finish: Match Body Finish
Neck Finish: Match Body Finish
Fingerboard: Ebony
Number of Frets: 24
Fret Size: Extra Jumbo
Inlays: None
Custom Inlays: No
ESP Inlay at 12th Fret: Yes
Fingerboard End: Square
Fingerboard Binding: Yes
Headstock Binding: Yes
Binding Color: Black
Nut: Graphite
Nut Width: 1 5/8"
Neck Contour: Thin "U"
Headstock Logo: ESP Custom
PART SPECIFICATIONS
Hardware Color: Black
Bridge System: Non-Tremolo (Stop Tailpiece & Tune-o-matic)
Recessed Tremolo: N/A
Pickguard: No
Pickguard Color:
Tuning Machines: Locking Sperzel
Input Jack: Side of Body
Pickups: EMG
Pickup Model: Bridge: 81 Middle: 81 Neck:
Control Pattern: 2 vol knobs,toggle switch in the regular place.

[blackmachine]

Rhymenocerous.. your Tele..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/FenderCustomOrangeGoblin.jpg

Pls don't use quote generator.. They're hard to read

[darkalone]

:eek: You have good taste in Teles!!!

[blackmachine]

Dom.. Your EC..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomDom-2.jpg

[JeanPaul du Vinnie]

JeanPaul du Vinnie.. Your Strat..
Edit: Forget to change bridge pickup, sorry
Thanks man!

[Dom1412]

Thanks Black!

[Rhymenocerous]

Thanks so much, black, it looks great.

A few changes though, please:

figured top, flamed maple binding throughout the whole thing, mother of pearl eye of horus inlay stretching across the 11-13 frets, maple fretboard, old-style bridge, and no logo on the headstock. Thanks so much!

[Gian]

Thanx for the image Gian..:)
Thanks Gian and Blackmachine!!!

;)

[blackmachine]

Det Brinnande Röda.. Your SV..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomGrowlingBungHole-2.jpg

[Dingbat-Walabi]

micheal amott ninja
24 ebony frets
see thru flamed maple finish
chrome hardware
chrome pickgaurd
white binding on HS and fingerboard
ESP pointed headstock match body color
trident inlays like this, with 2 in the 12th and 24th frets like this but without the circlehttp://www.goldenstag.net/MiscSCA/trimarisawards/silver-trident.gif
seymour duncan blackouts in the bridge
floyd rose
25.5 scale
unfinished maple neck
1 volume knob

[xchumfiestax]

If you don't mind...

25.5 scale 24 XJ frets
EX body
reversed pointed headstock
black hardware
fixed bridge
1 emg 81

If i could see this in see thru black (one quilted, one flamed) as well as with and without white binding, that would be awesome

[Total Eclipse]

:eek:Thankyou so much Blackmachine! :D

[someguy]

What happened to mine?

ESP RS, but the pointy one, not the rounded one.
Black beveled edges with a white flamed maple top.
Black Floyd, black hardware.
EMGs
Ebony fretboard with 'X' inlays, 2 at the 12th fret.
I kind of want to see one with the standard headstock (that looks kind of like a Dean)
but also one with an F headstock, the kind where it says ESP in the middle as opposed to the top.

[Rhymenocerous]

Black, if you could use this (http://www.hobbithouseinc.com/personal/woodpics/bubinga/bubinga%20comparison%20plh.jpg) as the top, that'd be great.

I'm sorry. :o

[Det Brinnande Röda]

Thanks blacky!!! That came out way better than I imagined! LOVE

[Thrashman]

I know this can't be done in real life, but please do this one for me blacky..

Gibson flying v shape with a cockstock, white symmetrical pickguard(it should be the same on the upper part of the guitar, as the lower..if you understand..), body should be black, aswell..

Ebony board, bone nut, no inlays, only one vol knob that is push pull, and string through with a tuneomatic.. Tired so this may seem muddy but..hope you understand, and thanks alot in advance.

[rjoerger1291]

first request...

Black cherry quilted Eclipse
Gold hardware
EMG's (black pickup rings with gold screws if possible)
ebony fretboard
Red Jagermeister deer inlays


thats it, feel free to play around with it, and if you don't have time then i understand, its a lot of work

[CAPTAIN SARG]

mock up request:1. esp v shape quilted maple top, see-thru black cheery finish, emg 81/85 original floyd rose in black black hard ware master volume and 3 way toggle. black binding, ebony board, arrowhead inlays, reverse esp pointed redstock that matches the body

2. same specs except solid white finish. gold hardware, gold original floyd. and headstock that matches body. thanks alot =)

[BlackWidowESP]

Thanks so much blackmachine! Bad ass!

[BlackWidowESP]

just a couple of things you missed :o

NECK SPECIFICATIONS
Headstock Shape: ESP Pointy
Reverse: Yes
Tilt: Yes
Headstock Finish:Match Body
Neck Finish:Natural Satin
Fingerboard: Maple
Number of Frets: 24
Fret Size:XJ
Inlays: Arrowheads
Custom Inlays:

ESP Inlay at 12th Fret: Yes
Fingerboard End: Square
Fingerboard Binding:Yes
Headstock Binding: No
Binding Color: Black
Nut: Locking
Nut Width: 1 5/8
Neck Contour: Thin U
Headstock Logo: ESP

If you could just fix those i'd be the happiest little boy on earth :D

[Rhymenocerous]

Nevermind all that, black, I got impatient, so I did a shitty job myself. Haha.


However, if you could add flamed maple binding to the body, neck, and headstock, (maybe fix the bridge and tuners too :D), I'd be forever grateful.

Here it is: http://img297.imageshack.us/img297/9729/guitar2ri1.jpg

It's 1 AM now, forgive my terrible photoshopping. :p


Thanks so much!

[AsherTKK]

yay blackmachine is back... hope he'll do my request! *cough*

[mudvayne1993]

hey black, could u get me a horizon bass, not a horizon 3, with the teardrop headstock and its white with black bindings B/N/H, and blank Ebony board, and 35DC's much appreciated

[twistedblack69]

Just wanna apologise to people who aren't getting their mockups done, I'm just going from second to last page, can't really be assed to go thru n check which mockups have been done and which haven't. If you've been waiting ages, send me a PM and I'll hook you up ASAP

Zephman:
http://i9.photobucket.com/albums/a65/MustaineJr89/Guitar%20Mockups/MIIZephMan.jpg

Sorry about the quality, not that good today for some reason :(:(

[ZephMan13]

No problem man, still looks good. If u have any extra time than could you do that exact smae thing but in black with a hum/X/SC pup combo? thx alot dude.

[ZephMan13]

I will ave CS3 soon so ican do peoples miock ups aswell.

[freeballin]

Custom ninja idea:

Ninja V (no pick guard); one with reversed pointed headstock (Block logo), and one with 3x3 (script logo).
Silverburst finish (matching headstock)
Ebony fretboard, pearl (or white) binding
Floyd Rose
24 frets (24th where 22nd is on Amotts)
Black hardware on rev. heastock, chrome on 3x3

Bridge Pup: Duncan El Diablo
Neck: '59
chrome pick-up rings on chrome hardware
single volume, three way toggle, mini toggle.

Inlays:

This:

http://img217.imageshack.us/img217/5976/mjolnirqj0.jpg

at 3rd, 5th, 7th, and 9th frets. Block at 12th with "MJOLNIR". Diamonds at 15th, 17th, 19th, 21st, and 24th (doubled obviously)

All MoP

I think that's everything.

[BlackWidowESP]

nevermind mine, black. I did it.

http://i105.photobucket.com/albums/m215/Seckler/wootybootycopy.png

[ZephMan13]

Nice...... needs an ebony though, or a whiter maple.

[MikeC]

I've been checking out quotes on different designs from different guitar companys. Can someone photoshop me these details. It would be greatly appreciated and would help me make make my desicion alot easier.:)


Right handed
scale: 25.5
Body: USA SV
Body construction: set neck
body meterial: Mahogany
body binding: thin Pinstripe
Binding color: Black
pickup configuration: H-H
Body Finish:Dark Plum Purple
Headstock: Reverse regular headstock
Headstock Finish: matching body
Neck finish: matching body
Fingerboard Meterial: ebony
frets: 24
fretboard inlays: Small custom 'L' Shaped Inlays
fingerboard binding:white
headstock binding:white
nut: locking
width: 1 11/16
hardware color: black
bridge: OFR
tuners: grover
Pickups:Black Dimarzio X2N in the bride and a Duncan 59' in the neck
pickup rings: black metal
controlle knobs: 2 volume, 1 tone
other controlles: killswitch
pickup selector: 3 way toggle

[blackmachine]

DA.. Your performer..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomDarkAlone-3.jpg

[darkalone]

Dude... simply beautiful. Thanks man!!!!!!!!!!!!

[Gian]

Wow!!! that performer is sweeet!

[Helgriz]

Hey everyone!

You are very skilled so I have a very special request for you that would lead to a custom model I plan to order for myself.

It's a bit difficult so I hope it will not be too much of a hassle to do.
There is no hurry so you can take your time.

Here we go!

Basic model: RZK-1

Changes:
Fingerboard : ebony
Headstock: matching body pointed reversed like say a KH-2

Inlays: I would like a moon cycle on the fingerboard starting from 3rd up to the 21st fret, ESP inlay on the 24th.

The way I see it, we would see the whole cycle on the neck in the classic order with the smallest opposite crescents on the 3rd and 21st frets, slightly bigger crescents on the 5th and 19th frets, and so on with the full moon on the 11th to 13th fret, centered on the 12th fret.

A bit like this but with 2 more phases.
http://www.afreshhorizon.co.uk/images/moon_phases.jpg

Body art:
No more cross but at its place the hourglass you can find on my band's myspace webpage in the background in some black and white with the darker colours on the outside like on the picture:
http://www.myspace.com/sotime

The mirror is changed to have a circle (moon-like) shape around the bridge/pickups, starting from the end of the neck and stretching to the end of the bridge, a little like the original mirror spot and size.

The pots/switch can be dropped in the lower part of the axe.

The rest can remain the same (pickups covers, chrome hardware,...)


I thank you very very much in advance for the work! It means a lot to me because it's a true project of a custom guitar I will order later on, so it matters more than you can even believe to my eyes. :D

[Zakk EXP]

Hi blackmachine!

I have an unconventional wish, a mockup of my actual desktop wallpaper :lol

http://img522.imageshack.us/img522/9598/zakkwylde1024x768vc4.jpg

1. With Gibson LP Custom head
2. With Gibson LP Custom head and golden stripes instead of white
3. Gibson LP Custom head and confederation flag body


I'm looking forward to it, thanks in advance :D

[Dingbat-Walabi]

lol requests are stacking up...good thing mine is next in line (i think, or atleast pretty close)....

[someguy]

Blackmachine needs a sidekick...

[Trogdor]

^ Didn't twistedblack say he was doing some, too?

[ZephMan13]

Twisted did mine for me.

[BlackWidowESP]

Sarg Pt. 1:

http://i105.photobucket.com/albums/m215/Seckler/sarg1copy.png

[twistedblack69]

Hey Trog, sorry, only had the odd hour here n there spare over the last couple days. Here you go, not brilliant, the maple wasn't changing color properly:

http://i9.photobucket.com/albums/a65/MustaineJr89/Guitar%20Mockups/TrogdorGreenV.jpg
http://i9.photobucket.com/albums/a65/MustaineJr89/Guitar%20Mockups/TrogdorBlueV.jpg

[Trogdor]

Hey, thanks man! :cool:

[CAPTAIN SARG]

Sarg Pt. 1:

http://i105.photobucket.com/albums/m215/Seckler/sarg1copy.png

thank you so much thats awesome. can you also do my ice its the first request

[BlackWidowESP]

yup... workin on it:D

[BlackWidowESP]

http://i105.photobucket.com/albums/m215/Seckler/sarg2copy.png

[ZephMan13]

!!!!!!! Holy Hell! I Just Shit My Pants! Thats So Fucking Beautiful! Omfg!

[rjoerger1291]

can someone please do a black tele with the esp vintage (GL 56 style) headstock with the red/whit/black EVH pickguard? I dont care about pups and hardware, do whatever you feel looks best

[Suicide Japan]

Hi everyone ! Could someone make this mockup for me, please ?

The base is an ESP RS-S : http://www.guitarsatbmusic.com.au/esp/guitars/esporiginal/rs/hires/rs-s.jpg

With the SV's white stripes on the body : http://www.guitarsatbmusic.com.au/esp/guitars/espstd/sv/hires/sv-std_blk.jpg

EMG pickups (81-85)

One more knob, for Tone

ESP pointed headstock, reverse, black with white binding.

Thank you !

[blackmachine]

AsherTKK.. Your Forest GT..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustom3E1Guy-1.jpg

[Det Brinnande Röda]

:eek::eek::eek::eek::eek::eek:

[efanny]

Baritone exp, black, white gibbo explorer style pickguard, emg 81 and 60, one singal volume and no pickup selector switch (why? i have no idea), ebony board w/ diamond inlays, chrome hardware, sperzel locking machine heads, string thru body

in two versions: one with a hocky stick style one (like one hetfields esp's, i dunno what they're called) and one with reverse esp six in a line

i would do it myslef but i am shit with computers, which is the reason i havent recorded demos of my songs for my band to listen to yet {:S

could it also have a bevel going along the bottom edge?

[Rhymenocerous]

Black, please ignore all my previous requests, I'm sorry, haha. I'd just like a few little changes to be made.

http://img100.imageshack.us/img100/7572/untitledfg5.jpg


Fix the tuners, fix the end of the fretboard, old-style tele bridge, and one with a maple headstock.


That's it.


Thank you so much, man. Sorry if I've been really annoying.

[staccato tomato]

Hey guys,

I'm considering this:

http://i104.photobucket.com/albums/m168/jl122/mock-2.jpg

25.5 scale
Extra Thin U neck, natural satin
ebony fretboard
24 frets
offset block inlays
81 active pair
reverse tilted head

I guess I'm calling the color Shark Blue

[BlackWidowESP]

!!!!!!! Holy Hell! I Just Shit My Pants! Thats So Fucking Beautiful! Omfg!

Thanks?

[CAPTAIN SARG]

http://i105.photobucket.com/albums/m215/Seckler/sarg2copy.png

thanks again how much does everyone think this would cost??

[staccato tomato]

I'm considering this...

http://i104.photobucket.com/albums/m168/jl122/mock-2.jpg

or flame...

http://i104.photobucket.com/albums/m168/jl122/mock3.jpg

25.5 scale
Extra Thin U neck, natural satin
ebony fretboard
24 frets
offset block inlays
81 active pair
reverse tilted head

I guess I'm calling the color Shark Blue

[MikeC]

I've been checking out quotes on different designs from different guitar companys. Can someone photoshop me these details. It would be greatly appreciated and would help me make make my desicion alot easier.


Right handed
scale: 24.75
Body: EC
Body construction: set neck
body meterial: Mahogany
body binding: Front & Back
Binding color: White
pickup configuration: H-H
Body Finish: Very Dark Plum Purple
Headstock: EC
Headstock Finish: matching body
Neck finish: matching body
Fingerboard Meterial: ebony
frets: 22
fretboard inlays: Small custom 'L' Shaped Inlays on the bottom left hand side of the fret starting at the first fret
fingerboard binding:white
headstock binding:white
nut: locking
width: 1 11/16
hardware color: black
bridge: OFR
tuners: grover
Pickups:Black Dimarzio X2N in the bride and a black Duncan 59' in the neck
pickup rings: black metal
controlle knobs: 2 volume, 1 tone with black speed knobs
other controlles: killswitch
pickup selector: 3 way toggle

[sixstringmind]

can someone draw a body like this (if its possible):
a SV shape but the bottem wing at the neck joint like a dimebag shape
but with the dean razor V's little bits on the end of the normal SV wings (the little pointy cut out bits)
i dont really care too much about the quality
just the body and neck roughly to get an idea
preferably black with a white background but whatever really
cheers

http://www.theobsession.net/images/razorbruno2.jpg
like this body but black and like a SV

so basically this guitar but a smaller bottem wing

[ESPKH4Builder]

hey all can someone do this for me i want to know how it would look before i spend money

Gibson Les Paul with a KH-3 Spider Graphic mounted behind the bridge, i have a LP copy that i want to put it on its black with silver hardware, please just put the graphic on it....


Thanks

[sixstringmind]

check this out no shit i did these in paint from a dean razorback but thats as far as paint will get me, believe me i tried.
anyway can someone customise these two guitars for me plz
(both the same, with a white background)

http://i238.photobucket.com/albums/ff127/sixstringmind/razorbruno4.jpg
http://i238.photobucket.com/albums/ff127/sixstringmind/razorbruno3.jpg

black diamond plate top
satin black bevels with white binding on the inside of the bevels
1 emg 81 in the bridge
no inlays
esp F headstock (satin black)
string through body with the V shape where the strings go through


thanks in advance

[Mister Guitar Himself]

I''d like a mockup of my mocked up guitar made by blackmachine....same specs only black hardware and a rebel flag as custom paint job...just like the dimebag guitar...
http://i59.photobucket.com/albums/g290/MisterGuitarHimself/_0ESPCustomMisterGuitarHimself.jpg
http://i59.photobucket.com/albums/g290/MisterGuitarHimself/USA_Rebel_Razorback.jpg

[rjoerger1291]

check this out no shit i did these in paint from a dean razorback but thats as far as paint will get me, believe me i tried.
anyway can someone customise these two guitars for me plz
(both the same, with a white background)

http://i238.photobucket.com/albums/ff127/sixstringmind/razorbruno4.jpg
http://i238.photobucket.com/albums/ff127/sixstringmind/razorbruno3.jpg

black diamond plate top
satin black bevels with white binding on the inside of the bevels
1 emg 81 in the bridge
no inlays
esp F headstock (satin black)
string through body with the V shape where the strings go through


thanks in advance


that was really cool. when you have time can you make it look like just a normal SV? basically its the razorback but only the two bottom things are pointy

[sixstringmind]

heres the SV version
http://i238.photobucket.com/albums/ff127/sixstringmind/razorbruno3-1.jpg

i think #4 is my favourite

[Casey K]

a molth.. lips n the hole area with f holes by the edges of the lips like the top would be the bottom of the mustash and the rest of it would be goin down if u can do thins then id think ur pro...


haha

u should do it tho....

[kingkobra813]

casey k if i knew what you were talking about. that would help.

[rjoerger1291]

casey k if i knew what you were talking about. that would help.

can you make me a black tele with a maple fretboard and an EVH r/w/b pickguard?

[Dingbat-Walabi]

wheres black?

[Adam]

Awesome ideas + mockups being shared here! :hat

I request if I may:

A right-handed Gibson 67 Flying V with:

* Body colour snow white (white pickguard)
* Reversed banana headstock (white also), white truss rod cover.
* 24 frets
* Ebony fingerboard with no inlays
* Black EMG 85 in bridge, 60 in neck
* Chrome hardware
* Chrome knobs
* Fender Stratocaster-style input jack below the knobs in chrome (avoiding the pickguard)

No logo necessary.

Thanks in advance to whoever attempts this! :D

[imprinted]

Slightly simpler request. Any chance somebody could photoshop the Urban Camo onto the EX, EC and F bodies? Black Hardware and T.O.M/String Through Body?

Many thanks in advance!

[AsherTKK]

blackmachine... i could marry you! loved the forest gt

[blackmachine]

Rhymenocerous.. Your Tele..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/FenderCustomOrangeGoblin-1.jpg

[Angel Of Death181]

http://i144.photobucket.com/albums/r166/BlackendJustice/mycustomidea11.jpg?t=1191267398

Just a little something i did, i dont have photoshop, i used paint

[ESPointer]

Hey all
I have been planning this custom for a while, but need an idea of what it looks like now. I would really appreciate it if someone could mock this up. Cheers in advance!


European Style (gibbo style) eclipse, with a flamed maple top in see-thru black.
Pickup Config: Hum Sing Sing (81, S, S)

Flag headstock, matching body finish
Dot inlays, with JH-3 style chequered flag on first fret if poss
Ebony fingerboard - 24.75 scale, 24 XJ frets
String thru

Could i get one with black hardware, and one with chrome? thanks

Thanks again, neknok

[Dingbat-Walabi]

micheal amott ninja
24 ebony frets
see thru flamed maple finish
chrome hardware
chrome pickgaurd
white binding on HS and fingerboard
ESP pointed headstock match body color
trident inlays like this, with 2 in the 12th and 24th frets like this but without the circlehttp://www.goldenstag.net/MiscSCA/trimarisawards/silver-trident.gif
seymour duncan blackouts in the bridge
floyd rose
25.5 scale
unfinished maple neck
1 volume knob

.

[burntoast]

Body: Horizon
Top: Quilted Maple
Finish: See-thru black
Binding: White (body, fretboard, and headstock)
Fretboard: Ebony with no inlays
Headstock: ESP Pointed (not reversed; should match body)
Pickups: Duncans with white pickup rings
Hardware: Chrome
Control layout: One volume knob and one toggle switch (similar to the M-II's layout; if possible, move the volume knob closer to the toggle switch so it's not directly below the bridge pickup)
Bridge: Stop tailpiece with a string-thru-body

Thanks!

[Metallhouse]

Schecter 006 w/ Ultra Headstock
Hot rails in the neck, covered PAF in bridge
Maple fretboard w/ no inlays
daphne blue body with matching headstock
TonePros TOM Bridge
Chrome Hardware
Single volume control and three way toggle

[Rhymenocerous]

Thanks so much, blackmachine!

Sorry if I was annoying about it. I promise that'll be my last request for a while, haha.

[BlackWidowESP]

see thru flamed maple finish
Soo...natural?:confused:

[zerosk8r900]

Body:M-II
Top:Flame Maple
Frets:24
Finish:Purple Burst(like on the PRS Allender SE)
Fretboard:Flame Maple
Inlays:Pearl Arrowheads
Headstock:Reverse ESP Pointed
Bridge Pickup:Seymour Duncan SH-13(Dimebucker)
Neck Pickup:Seymour Duncan 59'
Hardware:Gold
Controls:2 volume knobs, 1 MM-04 preamp boost, and a 5 way switch(position 2 and 4 are coil splits)
Bridge:OFR

[Dingbat-Walabi]

Soo...natural?:confused:

nope, see-thru blue flamed maple

[MikeC]

I've been checking out quotes on different designs from different guitar companys. Can someone photoshop me these details. It would be greatly appreciated and would help me make make my desicion alot easier.


Right handed
scale: 24.75
Body: EC
Body construction: set neck
body meterial: Mahogany
body binding: Front & Back
Binding color: White
pickup configuration: H-H
Body Finish: Very Dark Plum Purple
Headstock: EC
Headstock Finish: matching body
Neck finish: matching body
Fingerboard Meterial: ebony
frets: 22
fretboard inlays: Small custom 'L' Shaped Inlays on the bottom left hand side of the fret starting at the first fret
fingerboard binding:white
headstock binding:white
nut: locking
width: 1 11/16
hardware color: black
bridge: OFR
tuners: grover
Pickups:Black Dimarzio X2N in the bride and a black Duncan 59' in the neck
pickup rings: black metal
controlle knobs: 2 volume, 1 tone with black speed knobs
other controlles: killswitch
pickup selector: 3 way toggle

Please! :D

[Ravens Creed]

I'd like a Custom done in the colours of my football team Aston Villa one day.

I'm a designer but I'm at work so this is just something I knocked up in a few minutes to give you an idea.

http://img339.imageshack.us/img339/6899/horizoneg6.jpg

Probably should be with gold hardware, thinking about it in retrospect.

[Ravens Creed]

Here's a custom with a Digital camo job like the new US Army pattern. Its Milky's splendid looking Albino custom with a little retouching by myself.

http://img515.imageshack.us/img515/4073/espdigicamovf7.jpg

[synyster90]

Black M-II w/ a pearl pickguard. seymour duncan blackouts. two volumes, one tone. black OFR. bolt on. thin flat U neck. ebony board. alder body, maple neck. skull and crossbone inlays. this is my first post ever so if someone could do this up for me it would be greatly appreciated! thanks.

[rjoerger1291]

Here's a custom with a Digital camo job like the new US Army pattern. Its Milky's splendid looking Albino custom with a little retouching by myself.

http://img515.imageshack.us/img515/4073/espdigicamovf7.jpg

jeff hanneman has a custom exactly like that

[BoogieII]

jeff hanneman has a custom exactly like that

i wouldnt say exactly...

especially since its urban camo not desert.

[Det Brinnande Röda]

The only thing that's like hannemans is that it has the same finish pattern... and that it is a guitar..

[fugualarmclock]

That camo one looks gnarly especially since the pickups etc. look like they glow in the dark.

[Ravens Creed]

Yes apart from being completely the wrong type of Camo, having two knobs instead of three, strings through the body instead of a tremelo system, a totally different pick up config and different inlays, its exactly the same as Jeff Hannemans guitar. :)

[BoogieII]

That camo one looks gnarly especially since the pickups etc. look like they glow in the dark.

because they are not really there lol

[Casey K]

an sv..
snake skin body n head.
mop strips like alexis.
shark fin inlays going down.
george lynchs head stock the green comicozee one thats all crazy.
mop binding on neck n head.
thanks

[Det Brinnande Röda]

:x:x:x^

[kingkobra813]

casey k. that is an awsome guitar. if i have time today ill make it for you. but there is killbot band practice tonight. i think you also need 2 pickups. and they need to be emgs 81 and 85. and i think you just need a normal headstock. but i like the idea of the snake skin

[rjoerger1291]

Yes apart from being completely the wrong type of Camo, having two knobs instead of three, strings through the body instead of a tremelo system, a totally different pick up config and different inlays, its exactly the same as Jeff Hannemans guitar. :)

ya because ive fucking seen a JH digital camo, it was on the old ESP forum, im looking for pics

[imprinted]

Hannemans Digi Camo is Urban,not Desert like the mock up above.

Plus has JH ever used a guitar without a locking trem live? That's a general question to everyone by the way.

[Det Brinnande Röda]

ya because ive fucking seen a JH digital camo, it was on the old ESP forum, im looking for pics


wow d00d! missed the point you did

[Ravens Creed]

Here's something I'd like maybe. It would work on a DV8 or SV I suppose but neither are as nice as a KV in my opinion.


http://i12.photobucket.com/albums/a250/Srcharlz/Custom%20guitar%20generator/KvEdTr.jpg

or

http://i12.photobucket.com/albums/a250/Srcharlz/Custom%20guitar%20generator/KvEdLad.jpg

[Orphen84]

Hey Blackmachine, could you do for me these two mock-ups please?

1) Caparison Horus body; 27 frets, ebony fretboard, clock inlays, Floyd Rose, chrome hardware, EMGs (H-S config), black finish w/pearloid binding on body, neck and headstock, one volume knob.

2) Caparison Dellinger HGS FX, 24 frets, ebony fretboard, clock inlays, Schaller fixed bridge, black hardware, EMGs (H-S-S config), oiled mahogany finish, black headstock, white binding on neck and headstock, one volume and a blade switch.

Thanks in advance.

[Ravens Creed]

Here's something pretty ridiculous.

http://img181.imageshack.us/img181/6932/espgrecianscrollac1.jpg

[Det Brinnande Röda]

that's a cool concept imo

[Yoshi]

may i please point out that body wood is not necessary for a mock up :D Thank you,

Could i get a Mirage Custom with a black quilt top instead of the flame?

[AsherTKK]

that's a cool concept imo

+1 looks very schwain...

[ZephMan13]

All it needs is a vine of life inlay.
http://www.driskillguitars.com/cool_pic_of_inlaid_neck.jpg
http://www.robinsoninlays.com/gallery1/dubneck.jpg

[Terminatus]

If you guys have the time, I'd like a mock up of the custom I designed

Body Shape: H
Binding: Top
Binding Color: Créme
Pickup Configuration: Bridge: Hum Middle: N/A Neck: Hum
Finish: See-Thru Black Cherry
Headstock Shape: F/B
Headstock Finish: Black
Neck Finish: Natural Satin
Fingerboard: Rosewood
Number of Frets: 24
Fret Size: Extra Jumbo
Inlays: Arrowhead
Fingerboard End: Square
Fingerboard Binding: No
Headstock Binding: No
Hardware Color: Chrome
Bridge System: Non-Tremolo (Tune-o-matic & String Thru-Body)
Pickguard: No
Pickups: Seymour Duncan
Pickup Model: Bridge: JB Middle: Neck: 59
Control Pattern: 2 volume knobs and 1 tone knob and a 3 way toggle switch like a les paul (preferably in the same place, relatively)

Thanks in advance!

[AsherTKK]

All it needs is a vine of life inlay.
http://www.driskillguitars.com/cool_pic_of_inlaid_neck.jpg
http://www.robinsoninlays.com/gallery1/dubneck.jpg

great idea... what guitar is that doubleneck anyway? look awesome!

[Ravens Creed]

I did have a vine inlay in mind to match, I just couldn't be arsed to do it at the time.

[Gotskilla]

I am dying to have an Eclipse with the Urban Camo finish, like this mock-up...

http://i147.photobucket.com/albums/r287/Quantum_collectibles/UrbanCamoEclipse.jpg

[Thrashman]

that looks fuckin rad O_O

[Routis]

I'm going to build a guitar myself (actually just the body, but still) and it'd be nice to see a picture of it. Here are the specs, so if you guys have spare time I'd really appreciate it.

Body: TM-600-like, viper without sharpened edges
Colour: Blue see-thru
Neck: New H Headstock, rosewood fretboard
Pup: Seymour Duncan at the bridge position
Hardware: Chrome, one vol knob, one-piece bridge (like Schaller 456)

[Dingbat-Walabi]

Blackmachine! Where Art' Thou?

[gibsonexp]

I'd like a suhr standard in a blue quilt with white binding. The neck is maple with 22 fret rosewood board, no binding, gold tuners, square end, and mop dot inlays. The headstock is natural maple. For hardware, suhr standard tremolo, two gold knobs and a blade switch with two black suhr humbuckers. Thanks

[Ravens Creed]

That will be a silly amount of money please.

[imprinted]

I am dying to have an Eclipse with the Urban Camo finish, like this mock-up...

http://i147.photobucket.com/albums/r287/Quantum_collectibles/UrbanCamoEclipse.jpg


dear lord that's gorgeous! I wants! Time to start saving for that after I get my new one next month! (pics when I finally get it :) )

[ShreddyMcFunTits]

Does Blackmachine still reside here?

If so could I get an electric blue horizon, string thru, cock stock, emg's in neck and bridge, offset inlays, baritone, 1 volume, 1 tone and pot switch.

cheers mate.

[ESPManiac]

You took advantage of his skillz....


This is what you all get in return!

Its nice to know that your work is recieved well, rather than just a mass-surge of more requests.

[AsherTKK]

think black is on vacation...

[cfhmachado]

can some please do this same guitar with an ebony fretboard

[ZephMan13]

You took advantage of his skillz....


This is what you all get in return!

Its nice to know that your work is recieved well, rather than just a mass-surge of more requests.

Exactly, I was trying to warn them.

[ZephMan13]

Not only blackmachine, but also you MAniac, and all the other people doing mock-ups. You guys do one for some one and then thier like, "oh, it's okay,can I have another?"

I dont blame you guys for quiting.

[ESPManiac]

Nice to know that someone understands....its takes alot of perfecting to get a mock-up to look good. I dont have it quite down as much as black, but mine were close...and bieng somewhat of a perfectionist it takes a bloody long time to finish anything so that i am satisfied with the final product.

I would do more mockups, but its just generally not worth my time.

[Ravens Creed]

can some please do this same guitar with an ebony fretboard

Here you go.

http://img108.imageshack.us/img108/6720/espcustomcfhmachadobk7.jpg

Its not perfect but I only had a couple of minutes.

[cfhmachado]

thank you ravens,This will help me decide wheather to go with the ebony or maple.What yall think?

[ESPManiac]

Ebony :D Looks mucho bueno

Looks good with Maple, but Ebony gives it a much more "finished" look IMO

[Ravens Creed]

Apart from looks, Maple = brighter and crisper highs and Ebony smoother mids better dynamics and more sustain.

I'd always choose Ebony but thats just me.

[fickle19]

Could somebody please do a mock up for me?

A white strat with a white pearliod pickguard, maple neck with rosewood fretboard
Original Floyd Rose - HSS pickup configuration with all white pickups, 1 volume pot, and silver hardware. thanks in advance,
JA

[Angel Of Death181]

http://i144.photobucket.com/albums/r166/BlackendJustice/BCMIIsharkfin4.jpg

Can someone just put a floyd rose on this? thanx

Angel

[ZephMan13]

Just imagine it without the metal ring around the bridge. And wala, there your floyd.

[N3rdAl3rt]

hey black machine, small request here can you make another one of these
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomNerdAlert.jpg

but with a reversed jackson style headstock in snow white with black binding, but still says esp, thanks!

[ZephMan13]

^Thats almost the exact custom I want.

[Jace Kiburz]

can someone please make me this guitar with chrome hardware, dark chrome hardware, and gold hardware? If you couldn't tell, im thinking about changing the hardware and need some help deciding what color... maybe ill stick with black even.


http://i2.photobucket.com/albums/y10/napkindavoren/h207/CIMG1336.jpg

[zerosk8r900]

Can someone please make me a purple(same color as Paul Allender SE) flame top M-II, a reverse headstock, 2 Seymour Duncans, and a Maple fretboard with gold hardware and a Floyd Rose. I dont care what anything else is on it.

[Christah]

check this out no shit i did these in paint from a dean razorback but thats as far as paint will get me, believe me i tried.
anyway can someone customise these two guitars for me plz
(both the same, with a white background)


http://i238.photobucket.com/albums/ff127/sixstringmind/razorbruno3.jpg



Wow.It looks like the...erm... Vinnie Vincent custom.

[someguy]

Ah this thread is going so slow now...I've been waiting for like months for someone to get to my mockup....

[ZephMan13]

Ah this thread is going so slow now...I've been waiting for like months for someone to get to my mockup....

Stop bitching and mabye it
ll get done, mabye.

[JohnDoherty]

http://i122.photobucket.com/albums/o277/rooneyburger/PurpleMII.jpg

[AsherTKK]

Stop bitching and mabye it
ll get done, mabye.

hehe...

[Mister Guitar Himself]

I'd like a mockup of my mocked up guitar made by blackmachine....same specs only black hardware and a rebel flag as custom paint job...just like the dimebag guitar...
http://i59.photobucket.com/albums/g290/MisterGuitarHimself/_0ESPCustomMisterGuitarHimself.jpg
http://i59.photobucket.com/albums/g290/MisterGuitarHimself/USA_Rebel_Razorback.jpg

[KirkRhoads]

My god.. Before blackmachine there was KingJaymz who probably left because of all the bitching and nagging! Perhaps black leaves too? Poor guy

[Mister Guitar Himself]

you just need to give those guys your respect :) tell them that they leave good work and thank them for mocking up those guitars :)

[metaltheater]

Woah..looks like some drama...neway if someone could mock up this baby for me, twoud be appreciated.

M-11 with:
2 Emg 81's
OFR
Reverse Headstock w/ tilt
1 Vol
1 Tone
3 way Toggle
1 mini toggle for LED side dots
LED side Dots
Rosewood fretboard - 24 frets - jumbo
No inlay
Spalted maple top and matching headstock
------------
All black hardware.
Also too if i could see a 7 string with the same specs - there to be twins
.
Thanks guys

[shadowchild]

Hello!
Does someone could make a mock up with this caracteritics?

ESP KH4
The 2 volumes replaced by a volume and a tone
The tone replaced by a mini toggle (boost)
Silver paint like that http://www.synergyguitars.com/nik-huber-guitars/nik-huber-guitars-dolphin-silver-bolt-on.htm
Black pearl pickguard
Black headstock
Black hardware
Ebony fretboard
No inlay

[NaotoATG]

Guitar or Bass: Guitar

Right or Left Handed: Right
Scale Length: 25.5

BODY SPECIFICATIONS

Body Shape: Horizon
Construction: Bolt-On
Material: Basswood
Quilted Maple Top: No
Flame Maple Top: No
Binding: No
Binding Color:
Routing: Back
Pickup Configuration: Bridge: Hum Middle: None Neck: Hum
Finish: Black
Custom Graphic:

NECK SPECIFICATIONS
Headstock Shape: ESP Pointy
Reverse: No
Tilt: No
Headstock Finish: Match Body
Neck Finish: Natural
Fingerboard: Rosewood
Number of Frets: 24
Fret Size: XJ
Inlays: Dot
Custom Inlays:

ESP Inlay at 12th Fret: Yes
Fingerboard End: Square
Fingerboard Binding: No
Headstock Binding: No
Binding Color: None
Nut: Floyd Rose Locking
Nut Width: 1 5/8
Neck Contour: Thin U
Headstock Logo: ESP

PART SPECIFICATIONS

Hardware Color: Black Nickel
Bridge System: Floyd Rose Original

Recessed Tremolo: Yes
Pickguard: No
Pickguard Color: None
Tuning Machines: Schaller Locking
Input Jack: Side of Body
Pickups: EMG
Pickup Model: Bridge:81 Middle: None Neck: 81
Control Pattern: Volume, Tone, 3-Way Toggle (Rounded)

Something in a approach like this:

http://i13.photobucket.com/albums/a274/SgtMattBaker502/ESPLTDMH-CustomSmall.jpg

[Thrash]

I was just wondering if someone could take a SV (normal shape, not US one) and make it all black, Kahler bridge and reverse the headstock.

Im about to place an order for this one actully. Would be cool to see how it looks and not just how it looks in my head.

Maybe both with chrome and black hardware if possible so I can see which one looks best.
Thanks in advance, damn you guys are good =)

[JohnDoherty]

Hello!
Does someone could make a mock up with this caracteritics?

ESP KH4
The 2 volumes replaced by a volume and a tone
The tone replaced by a mini toggle (boost)
Silver paint like that http://www.synergyguitars.com/nik-hu...er-bolt-on.htm
Black pearl pickguard
Black headstock
Black hardware
Ebony fretboard
No inlay

Mind explaining for me how I'm supposed to replace a volume knob with a tone knob? Last time i checked they look exactly the same..

[JohnDoherty]

http://i122.photobucket.com/albums/o277/rooneyburger/SVKahler.jpg
not great..

[shadowchild]

Mind explaining for me how I'm supposed to replace a volume knob with a tone knob? Last time i checked they look exactly the same..

Yes... they look like the same :rollin

[Thrash]

http://i122.photobucket.com/albums/o277/rooneyburger/SVKahler.jpg
not great..

Cheers, awsome :cool:

[xchumfiestax]

If one of you guys could mock up an Eclipse II in vintage white with all black hardware, that would be awesome.

Thanks in advance

[MELOVINE]

hey guys, cool request here....

Eclipse (new horn)

4 knob config

see thru black finish, flamed top

Set Neck

only one pick up (bridge-EMG)

Ebony Board NO INLAYS

Black Hardware

White Binding (neck/headstock/body-top and back)


thanks in advance, and who ever does it if you could message me and let me know i would REALLY appretiate it

jon

[N3rdAl3rt]

hey guys, cool request here....

Eclipse (new horn)

4 knob config

see thru black finish, flamed top

Set Neck

only one pick up (bridge-EMG)

Ebony Board NO INLAYS

Black Hardware

White Binding (neck/headstock/body-top and back)



http://i66.photobucket.com/albums/h262/n3rdal3rt/mockup1.jpg

sorry i forgot the new eclipse horn instead

[BoogieII]

wtf 4 knob config with one pickup. thats just dumb lol.

[JohnDoherty]

Treble/Bass/Mid knobs with one volume8o

[JohnDoherty]

fiesta...http://i122.photobucket.com/albums/o277/rooneyburger/EclipseVWBlackhardware.jpg

[xchumfiestax]

^Thanks Rooney

NOW I want one :lol

[ShreddyMcFunTits]

Rooney if you ever find the time could you do for me an electric blue horizon, string thru, cock stock, emg's in neck and bridge, offset inlays, baritone, 1 volume, 1 tone and pot switch.

cheers mate.

[JohnDoherty]

wanna give me an example of the color you're going for?

[JohnDoherty]

also...offset inlays? like the Ibby ones?

[shadowchild]

Hello!
Does someone could make a mock up with this caracteritics?

ESP KH4
The tone replaced by a mini toggle (boost)
Silver paint like that http://www.synergyguitars.com/nik-huber-guitars/nik-huber-guitars-dolphin-silver-bolt-on.htm
Black pearl pickguard
Black headstock
Black hardware
Ebony fretboard
No inlay

Nobody can do this for me please:\?

[JohnDoherty]

funtits..
http://i122.photobucket.com/albums/o277/rooneyburger/elecbluehorizon.jpg

[JohnDoherty]

sorry, accidental custom headstock mod:P

[ShreddyMcFunTits]

almost, could I get a solid finish rather than a see-thru one please.

and EMG's if possible.

[JohnDoherty]

http://i122.photobucket.com/albums/o277/rooneyburger/horizonelecblue.jpg

[Shamino]

Can I get a Horizon Custom in solid red, floyd rose tremolo, fretless maple neck, with EMG's? Trying to get Andrè Olbrich's custom in my head.