The Mock-Up Thread

[gab4554]

Np FarBeyondDriven and KH-M

Here's the mock-up im gonna do :


Matt Parsons------Almost done
lucky13-----------Doing it after Matt's
FarBeyondDriven---Same as above
gibsonexp---------Same as above but IDK if im gonna be able to do al the specs
redneck-----------Same as above but Im not gonna be able to make those inlays sorry. And by Pearl binding do you mean Abalone?

This week-end I dont really have some time since I work alot but I might be able to do 1-2 maybe 3 tomorow. Then monday I might be able to finish them all.

Thanks for waiting.

[Metaldude30]

Thnx dude, that's fukkin badass, I think I'd like the normal F headstock more than the reversed but it still looks killer, would love to have that!!!!

[Matt Parsons]

Thank you very much! :D

[blackmachine]

Matt Parson.. Your Forest GT..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomMattParson.jpg

[BlackWidowESP]

Hi Blackmachine!

[blackmachine]

hey BlackWidow..;)
GibsonEXP.. Your MII..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomGibsonEXP.jpg

[Llexileon]

Fantastic work as always Blackmachine. Cool to see you're still lurking around here :p

[SA-WEET]

Holy shit. Good to see you back Blackmachine.:)



MyApocolypse, when abouts do you think my bass will be done? No rush.

[Matt Parsons]

Matt Parson.. Your Forest GT..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomMattParson.jpg

Thank you very much! :D

[Rhymenocerous]

Welcome back black!


Could you do for me: a tele, h/h (uncovered, unmarked, generic black hums), string thru tune-o-matic, tele control plate, satin black single-ply pickguard, oil finish, mahogany body, black binding. 22 fret ebony board, lpc inlay, matching mahogany headstock, 70s trussrod, sperzels. All hardware black. Thank you so much!

[gab4554]

woot black is back. Nice too see you again. And with better mock-up then mine :P

[gibsonexp]

Thanks a ton black! Would be even more awesome if I could see the body in black 8o

[blackmachine]

Rhymenocerous... Your Tele..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomRhymenocerous.jpg

[lucky13]

cool shit, Gab. thank you. i can't wait to see it.

[Rhymenocerous]

Looks awesome black, thanks!


Can you make a few corrections, though?

- regular tele headstock, 70s truss rod
- black binding on the body


That's it, thanks!

[blackmachine]

Just for fun..:p

http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/FenderCustomBlackmachine.jpg
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomBlackMachine-2.jpg

[MarcoNL]

That is one sick camo Horizon!

[gab4554]

here's your M-II FarBeyondDriven http://i73.photobucket.com/albums/i233/unholyheart/M-IIwhiteHHS.jpg

[FarBeyondDriven]

wow it looks great, thanks gab!

[TheFue]

Any chance I could see an ESP F in See thru black with a Spalted Maple top, Ebony fret board with white binding Iron Cross inlays, black hardware, string-thru, 2 emgs?

Much appriciated

[lucky13]

hey Black Machine, could you do mine? i'm not sure if Gab is doing it or not.

[gab4554]

^^ Im on it right now. Dont worry I didnt forget you

But i have a few questions :
Do you want inlays? and where you want your bindings

[Rhymenocerous]

Thanks so much, black! That's perfect! :D

[lucky13]

^^ Im on it right now. Dont worry I didnt forget you

But i have a few questions :
Do you want inlays? and where you want your bindings

oh ok, cool. wasn't sure :lol

the black and white binding on the front of the body and headstock, and then just white binding on the neck.

i dunno about inlays. maybe LPC blocks?

[Zach21]

If anyone could get around to this I would appreciate.

Vintage Plus body, with the vintage plus headstock on reverse.
See thru purple(a deep shade of purple) on a quilt maple top
22 fret ebony board
dot inlays
hipshot style fixed bridge
black hardware
H-S-S, 3 dome knobs, 5 way switch
And could you post a picture with a black pearl pickguard and one with a white pearl pickguard?

[xchumfiestax]

Excuse me good sirs, I have a request

one of these
http://www.espguitars.com/images/guitars/SC-607B.jpg

with a quilted top and this finish
http://www.espguitars.co.jp/original/images/hrz_ctm_qm_deep_ocean_.jpg

middle pup moved to the neck position and a blank ebony fretboard

Thanks much!

[blackmachine]

Zach21.. Your vintage plus
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomZach21.jpg

[blackmachine]

xchumfiestax.. your Horizon..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomxchumfiestax.jpg

EDIT: forgot to change knobs config

[xchumfiestax]

blackmachine, you are the fuckin man

don't worry about the knobs, it was mainly to get an idea of the look of the guitar. all i need to do now is finalize the specs and set aside the funds :cool:

[gab4554]

Here's your Horizon lucky13 sorry if it was that long

http://i73.photobucket.com/albums/i233/unholyheart/hrzfrswcopie-1.jpg

[Zach21]

blackmachine for president.

If i end up getting one of those made though, it'll probably be with a solid black pick guard with some blackburst outlining the purple. I'm not digging the pearl on quilt maple.

[lucky13]

Here's your Horizon lucky13 sorry if it was that long

http://i73.photobucket.com/albums/i233/unholyheart/hrzfrswcopie-1.jpg

no worries man. it doesn't look like i was expecting it to :lol i'm not worried about it though. at least i can get an idea of what it'll look like.

[Zach21]

Ok. I wanna get a quote done on that mock up so I can figure out what the hell I'm gonna have to save up to.

So if it's not too much trouble, can you stick a plain black pickguard on that, and give it blackburst edges please?

[ESPChris91]

i made one for myself. millions of switches and knobs, creme duncan jb, emg, gibson pup, inlays are switches and knobs...
http://www.freeimagehosting.net/uploads/1ab1193dc7.jpg (http://www.freeimagehosting.net/)

[Zach21]

Knobs for inlays?

[blackmachine]

Zach21.. Your Vintage Plus..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomZach21-1.jpg

[Aquafina]

If its not too much trouble, would someone be able to mock this up for me?

An Eclipse, in see-through black, flamed maple top, with the old steph carpenter (6 string) control and pickup layout (ie: HHS, blade toggle, 1 tone 1 vol), black hardware, no inlays, 22 fret...oh and the pickups would be open pole duncans.

EDIT: Forgot to mention stop-tail bridge and regular EC headstock, ebony board, and white binding all around. :|

Much appreciated,

Aqua

[lucky13]

hey blackmachine, can you do a mockup for me?

This Guitar:
http://www.bmusic.com.au/images/aehorizonfr.jpg


with this design:
http://www.gitaar.net/forum/index.php/file/download/4/1747/Gibson_1968_Les_Paul_Custom_Silverburst.jpg

Chrome Hardware, EMG 81 in the Bridge, 60 in the neck. LPC binding on the horizon. LPC Block Inlays. Ebony Board.

Thank you in advance.

[nameless]

xchumfiestax.. your Horizon..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomxchumfiestax.jpg

EDIT: forgot to change knobs config

Now that is fucking smokin'.

[Zach21]

Zach21.. Your Vintage Plus..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomZach21-1.jpg

That is perfect man. Thank you so much.

[Dick Tater]

Does anyone have a pic of the bound ESP RR with the cock-stock? I was loking to get a mock of something around that body.

[SA-WEET]

Does anyone have a pic of the bound ESP RR with the cock-stock? I was loking to get a mock of something around that body.

The BDM V?

http://farm1.static.flickr.com/37/89636042_2e08ed24d6.jpg?v=0

[tonyjh3]

If someone could mock up this guitar for for me I would really appreciate it.

ESP MX-2 (Explorer)
Vintage Black finish (flat black) same as Eclipse II VTB
Dot inlays with A KH-2 style skull and crossbones at the 1st fret only
Black hardware
Ebony fretboard
EMG pick ups 81/60
Tune-o-Matic w/stoptail, Sperzel tuners
Regular ESP logo
Standard MX-2 control layout/position (2 volumes w/3-way toggle)
22 frets

Here's a pic of one of my MX's for reference. Basically I want this guitar in Vintage black with a KH2 skull and crossbones inlay at the first fret with the standard dots on the rest of the board.

http://i237.photobucket.com/albums/ff233/tonyjh3/P6280014.jpg

Thanks in advance!

[blackmachine]

tonyjh3.. Your Explorer..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomtonyjh3.jpg

[Dick Tater]

The BDM V?

http://farm1.static.flickr.com/37/89636042_2e08ed24d6.jpg?v=0

yeah, thanks man. Do you have a more clear picture of the V? Like the one the custom shop had in it's gallery.

[DrivingDownTheDarkness]

Zach21.. Your Vintage Plus..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomZach21-1.jpg

Can some one mock me up that but in a tele shape with a tele pickguard and a esp reverse pointed headstock please thanks in advance

[SA-WEET]

yeah, thanks man. Do you have a more clear picture of the V? Like the one the custom shop had in it's gallery.

I dont have the Custom Gallery shot. But a few on Google Images..


http://defyunlearn.com/images/2006/2006-04-28/black_dahlia_murder/black_dahlia_murder008.JPG
http://farm1.static.flickr.com/43/89636044_62deae842a.jpg?v=0
http://i295.photobucket.com/albums/mm121/BDM_FAN1993/BDMWhiteV2.jpg
http://i295.photobucket.com/albums/mm121/BDM_FAN1993/BDMWhiteV.jpg
http://i295.photobucket.com/albums/mm121/BDM_FAN1993/black-dahlia-murder_wacken.jpg

[Metaldude30]

I'd appreciate an urban camo tele all black hardware, no pickguard, emgz, string thru with a reverse MH headstock please.

[Dick Tater]

Thanks anyways man.

[Big Alex]

Les Paul with a See-thru nat. color.
Burl Maple top.
Ebony board. no inlays
Gibby headstock.
Sperzels.
:)

[Adam]

Could I please have what is essentially that Mastodon silverburst Gibson V, but as a 67 version isntead of a 58? So 67 style pickguard/control layout etc.

Oh and if it was possible, the same thing without inlays- to compare :)

Thanks in advance!

[blackmachine]

Metaldude30.. Your Tele..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomMetaldude30.jpg

[blackmachine]

xBig Alx.. Your LP..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/GibsonCustomxBigAlx.jpg

[Curt]

hey blackmachine, how about a dark purple flametop explorer, black hardware, emgs, t.o.m. with stop bar, ebony fretboard, iommi cross inlays, same control layout as a gibson explorer.

[AxeVirtuoso]

Could someone do the following:

M2 Body, reversed headstock
2x EMG, KH-2 knobs layout
Floyd Rose
Ebony Fretboard, Piranha inlays
Quilted maple top, Deep Red. Matching Headstock.

Once with white binding on body, neck & headstock, and once whithout binding.

Thanks :)

[Aquafina]

Here's some example pics of the control layout for my request a page back.

http://www.computersunlimited.com/images_products/12092_big.jpg

Hopefully that makes it easier for whoever wants to do it...

Once again, it'd be much appreciated,

Aqua

P.S.: If that image is too big, just tell me. :o

[the pale redneck]

could someone do a see thru blue-flamed eclipse w/ 27 frets. and scalloped frets (if it shows up, otherwise, skip it). and 4 emgs (3 81s, 1 sa at the neck). also, a floyd rose (black) 1 toggle. 4 knobs. tribal inlay on an ebony board. black hardware. F style headstock.

this is gonna be badass. thank you, i know this one is gonna be a doozie.

[tonyjh3]

tonyjh3.. Your Explorer..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomtonyjh3.jpg

Blackmachine that is awesome. Thanks so much, I really appreciate it.
Killer job!:D:D:D

[Adam]

could someone do a see thru blue-flamed eclipse w/ 27 frets. and scalloped frets (if it shows up, otherwise, skip it). and 4 emgs (3 81s, 1 sa at the neck). also, a floyd rose (black) 1 toggle. 4 knobs. tribal inlay on an ebony board. black hardware. F style headstock.

this is gonna be badass. thank you, i know this one is gonna be a doozie.

:|

Although it would look pretty awesome, you do realise that the fret access for the 24th-27th frets will be absolutely abysmal in real life, right? :p

[smashandgrab1forme]

xchumfiestax.. your Horizon..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomxchumfiestax.jpg

EDIT: forgot to change knobs config

WHOAHH THAT IS HOT!!!!!!!!!!!! :eek::eek::eek::eek::eek:

[Curt]

could someone do a see thru blue-flamed eclipse w/ 27 frets. and scalloped frets (if it shows up, otherwise, skip it). and 4 emgs (3 81s, 1 sa at the neck). also, a floyd rose (black) 1 toggle. 4 knobs. tribal inlay on an ebony board. black hardware. F style headstock.

this is gonna be badass. thank you, i know this one is gonna be a doozie.


:x

sorry but that just sounds like it would be horrible looking tho, I may have to eat my words when the photoshop is done.

[smashandgrab1forme]

Yeah that is a phail in the making

[Curt]

wow that is the first time I have had an opinion that was not an "its just me" thing.

[lucky13]

the guitar would be shipped using Failtanic.

[FarBeyondDriven]

is he joking?

[xchumfiestax]

could someone do a see thru blue-flamed eclipse w/ 27 frets. and scalloped frets (if it shows up, otherwise, skip it). and 4 emgs (3 81s, 1 sa at the neck). also, a floyd rose (black) 1 toggle. 4 knobs. tribal inlay on an ebony board. black hardware. F style headstock.

this is gonna look like ass... and not the good kind. thank you, i know this one is gonna set sail for phail.

Wow, I totally agree with that last part

[the pale redneck]

is he joking?

yes.
edit, is all seriousness, can someone do a wangcaster in black?:p:rollin0]

[lucky13]

yes.
edit, is all seriousness, can someone do a wangcaster in black?:p:rollin0]

ebony board?

[Curt]

you should put in some bare knuckles for huge balls.:p

[iheartsquires]

can someone do a mh with a black flame top? ebony, black hardware, blackouts (or emgs) esp pointed headstock, black floyd, 1 knob, 1 toggle. offset abalone fert marks (like that of an mh 400)

[Big Alex]

xBig Alx.. Your LP..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/GibsonCustomxBigAlx.jpg

Thanks heaps mate. :cool:

[Dingbat-Walabi]

blackmachine plz

ebony board
tele body
white binding on HS, neck, and body
quilted maple top
ESP block logo
see-thru blue-burst paint
blue-LED inlay
fluer dis lis inlay
neckthru
black hardware
sperzael locking tuners
emg 85/85
2 volume, slanted blade pu-switch
string-thru bridge
reverse pointed HS

[Metaldude30]

Could you possibly make the background black, I think it would show up better! Thnx!!


Metaldude30.. Your Tele..
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomMetaldude30.jpg

[xchumfiestax]

Could you possibly make the background black, I think it would show up better! Thnx!!

wouldn't that defeat the purpose? :\

[Metaldude30]

Nevermind the background, it was the angle of my monitor that was distorting the image duhhhhhh, Oh yeah and 2 single knobs and the 3 way, no plate behind them and a normal configuration. Sorry I didn't think about this stuff before. Thanks!!!

[nameless]

Hey, Can someone make me this please?

Ibanez RGA121, Violin Flat, with a PGM neck (maple board, reverse headstock).

Its pretty simple, but I dunno if you guys do Ibanez mockups :lol.

Thanks in advance!

[Imperium]

This with Gold & Chrome hardware:
http://www.harmony-central.com/ProductImages/Large/000029321.jpg

And this with Gold Hardware:
http://img3.musiciansfriend.com/dbase/pics/products/1/8/3/541183.jpg

[nameless]

Hey, Can someone make me this please?

Ibanez RGA121, Violin Flat, with a PGM neck (maple board, reverse headstock).

Its pretty simple, but I dunno if you guys do Ibanez mockups :lol.

Thanks in advance!

For some perverse reason, I can't edit my post.

But anyway, nevermind that now, thanks to Dom1412, I've done it myself! Thanks again dude.

[BrazilianBootyLover]

Mockup request!


M II body- quilted maple top, dark purple burst (fade to black on wings)

reversed headstock, quilted and paint to matching body


white pearl binding on body,neck and head

ebony fretboard with off set block inlays

Hipshot hardtail bridge,black

emg 81 bridge, 60 neck

one vol knob in tone position


3 way blade switch

ESP block logo in pearl

[Thrash]

Would anyone be able to make a small adjustment to this?
http://i73.photobucket.com/albums/i233/unholyheart/M1_BKS_KH_NI.jpg
But with a normal headstock (not reversed) and White binding on the neck and headstock? Thanks in advance :)

[Curt]

can anyone do this for me

gibson 67 style (including headstock)

flame maple top (matching headstock)

dark red

ebony fingerboard no inlays

black hardware, floyd,knobs,tuners,pup rings

black binding: body, neck, head

pups (both black) x2n/paf pro

and control layout like the ltd v500


thanks in advance.

[Big Alex]

EC - 22 frets, Eboner board, Flame top, See-thru White, Dot inlays (and LPC Blocks if you could), ESP Inlay at the 12th, Black binding - Body, neck and headstock, Normal control layout 2 vol, 2 tone, basic SD pups w/logo, Black hardware, Sperzels.


Cheers.

[gibsonexp]

http://i510.photobucket.com/albums/s342/EJCruz123/dellinger_om.jpg

Can I have this but with the esp M-II body, no inlays and reverse M-II headstock please

[Big Alex]

Can I have this but with the esp M-II body, no inlays and reverse M-II headstock please

Why don't you just look at a natural M-II. :rolleyes:

[xchumfiestax]

Why don't you just look at a natural M-II. :rolleyes:

that would be too easy

[ZephMan13]

Les Paul
Honeyburst finish
Flame maple top
22 frets
Ebony board
three humbuckers(Cream)
Eclipse Style headstock with the ESP script font
1 vol/tone

Thanks in advance!

[Curt]

wow ^ thats gonna be hawt!

[ZephMan13]

wow ^ thats gonna be hawt!

yes, yes it will :)

[Curt]

I am waiting on my V as well.

[GuitarmanST]

Finally im able to post on the forums! Took a few days of me wandering around before i was able, but i wanted to shoot this out there and see if it could be done for me. The exact same guitar is in process of being sent to ESP, i need to get the paperwork to look over and sign for, then its in production baby!
Thanks for any Mock' that can be done with this beast, it will take awhile before its arrival, but atleast i have something to look forward to in the future ;)

Thanks again brothas!!!!

Guitar
Right Handed
Scale= 25.5"(guitar)

Body= Horizon
construction= Neck Thru
Quilted Maple Top= YES
Binding= (top)
Color Binding=Creme
Routing= Back ( no pickguard)

Pickup Configuration= ( Bridge-Hum, Middle-N/A, Neck-Hum)

Finish= See-Thru Aqua

headstock shape= Horizon(new)
headstock Finish= Match body finish
Fingerboard= Ebony
Frets= 24
Fret Size= Extra Jumbo
Inlays= Offset blocks ( blocks)
ESP Inlay at 12th fret= YES
Fingerboard End= Square
Fingerboard binding= Yes
headstock Binding= Yes
Binding Color= Creme

Nut= Graphite
Head stock Logo= ESP ( Classic Logo, with "Custom S.T" for the model name)

Hardware Color= Black
bridge system= Non-Tremolo ( Tune-o-matic & String Thru Body)
Tuning Machines= Deluxe Gotoh
Input Jack= Side Of Body
Pickups= Seymour Duncan(black)

[BlackWidowESP]

Just for fun..:p

http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/FenderCustomBlackmachine.jpg
http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomBlackMachine-2.jpg

Woah, that tele is awesome. how did you do the finish?

[Robotsatemygrandma]

Hmm if you want to make this, it'd be sweet to see.

Basically a Stef Carpenter 6 string with
No single coil in the neck
Ebony Fretboard
White binding on neck and headstock
Black Floyd Rose
Reverse matching headstock
Flamed Maple Top
Natural color (like a M302)

[GuitarmanST]

Good luck with that :hat

Hmm if you want to make this, it'd be sweet to see.

Basically a Stef Carpenter 6 string with
No single coil in the neck
Ebony Fretboard
White binding on neck and headstock
Black Floyd Rose
Reverse matching headstock
Flamed Maple Top
Natural color (like a M302)

[cfhmachado]

hey blackmachine
could you put a fender style headstock on this guitar with the same figure and color scheme http://i183.photobucket.com/albums/x3/cfhmachado/ESPCustomCFHMachado.jpg
Thanks

[TheEnemy]

woa all those mock-up are crazy!

I would like to see an horizon with:
-a spiky lower horn(a bit like ibby but less curved and a bit shorter)
-27 fret,single,hum like the kiko loureiro model
-ebony board with kind of arch enemy logo mixed with a cross that start at fret10 and go up to fret15 and thats it for inlays
-pearl binding for neck and headstock
-flamed maple top,see thru dark purple/black with black sunburst
-black hardware,floyd rose,volume,volume,tone and a 3way switch


I think it would look awsome:D

[Diurno]

hey blackmachine
could you put a fender style headstock on this guitar with the same figure and color scheme http://i183.photobucket.com/albums/x3/cfhmachado/ESPCustomCFHMachado.jpg
Thanks


Damn....this one with a simple "red wine" finish but with the same flaming....it's my perfect axe!

[lucky13]

hey blackmachine, can you do a mockup for me?

This Guitar:
http://www.bmusic.com.au/images/aehorizonfr.jpg


with this design:
http://www.gitaar.net/forum/index.php/file/download/4/1747/Gibson_1968_Les_Paul_Custom_Silverburst.jpg

Chrome Hardware, EMG 81 in the Bridge, 60 in the neck. LPC binding on the horizon. LPC Block Inlays. Ebony Board.

Thank you in advance.

Please?

[Zach21]

I think we scared him off with all of our requests. He's probably busy as it is.

[ZephMan13]

What do you think happened last time? thirteen year-olds ask him to make mock-ups when they cant even afford a custom.

[BloodJunkie]

What do you think happened last time? thirteen year-olds ask him to make mock-ups when they cant even afford a 50 series.

Fixed:p

[GuitarmanST]

Fixed:p
haha Very true, and knowing the custom i posted is in the process of making, im just hoping i can catch a glimpse of whats to come ;)

[Ramon]

Just for fun..:p

http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomBlackMachine-2.jpg

Could you do M-II with the same finish and dot inlays + ESP inlay at 12th fret? One wint reversed headstock, and one with normal? :)

[ZephMan13]

Fixed:p

:rollin nice, they can hardly afford an andromalius sig.

[cfhmachado]

hey blackmachine
could you put a fender style headstock on this guitar with the same figure and color scheme http://i183.photobucket.com/albums/x3/cfhmachado/ESPCustomCFHMachado.jpg
Thanks

Can anyone do this small mock up for me?

[GuitarmanST]

Can anyone do this small mock up for me?
theres already a lot of people before ya man, re posting is the last thing you should do to catch positive attentions

[Gfunk]

haha Very true, and knowing the custom i posted is in the process of making, im just hoping i can catch a glimpse of whats to come


How long is delivery?






How about some pics of other Horizons you have enjoyed.





:)

[BrazilianBootyLover]

How long is delivery?






How about some pics of other Horizons you have enjoyed.





:)

Plus one!

[GuitarmanST]

quoted from DCGL, 11-12 months, What was mentioned is production is back logged at the moment, but could always be sooner. Looking forward to it-

How long is delivery?






How about some pics of other Horizons you have enjoyed.





:)

[carbons2k]

Id like to see a DV8 with the james hetfield flames from the jh-1 and no inlays

[David_VI]

This is easy.. could someone do an Ex-400 with the strings through the body not with tailpiece, but going throug the bottom following the line of the body if that makes sense?

[ESPKH4Builder]

Just for fun..:p


http://i2.photobucket.com/albums/y1/blackmachine/Custom%20Guitars/ESPCustomBlackMachine-2.jpg

i like that....alot!

[lucky13]

hey blackmachine, can you do a mockup for me?

This Guitar:
http://www.bmusic.com.au/images/aehorizonfr.jpg


with this design:
http://www.gitaar.net/forum/index.php/file/download/4/1747/Gibson_1968_Les_Paul_Custom_Silverburst.jpg

Chrome Hardware, EMG 81 in the Bridge, 60 in the neck. LPC binding on the horizon. LPC Block Inlays. Ebony Board.

Thank you in advance.

Could someone mock this up for me? Please?

[David_VI]

I did it myself, but badly..

Do you think this works? and do you think its possible to do on my current one if I got someone with more responsibility and skill than myself.. Or would it mess up the finish drilling in?

http://img187.imageshack.us/img187/8928/image2ty6.jpg (http://imageshack.us)
http://img187.imageshack.us/img187/image2ty6.jpg/1/w795.png (http://g.imageshack.us/img187/image2ty6.jpg/1/)

But where do you find the little metal hole filler things.. what are they called?

David

[ZephMan13]

I did it myself, but badly..

Do you think this works? and do you think its possible to do on my current one if I got someone with more responsibility and skill than myself.. Or would it mess up the finish drilling in?

http://img187.imageshack.us/img187/8928/image2ty6.jpg (http://imageshack.us)
http://img187.imageshack.us/img187/image2ty6.jpg/1/w795.png (http://g.imageshack.us/img187/image2ty6.jpg/1/)

But where do you find the little metal hole filler things.. what are they called?

David

They're called Ferrules, they have different ones on stewmac.com

[Kannon]

A couple things I cooked up...

"ZERO" Custom Eclipse II
http://i190.photobucket.com/albums/z219/endrogeny/ZeroCustomEclipse.jpg

DiMarzio Super Dist. bridge, PAF Joe neck

Mahogany set-neck, Maple cap, full thickness body, ebony board.

Treva FR Custom Eclipse II

http://i190.photobucket.com/albums/z219/endrogeny/BlackenedEclipse.jpg

Can't decide what's in the bridge, SD Jazz in the neck

Mahogany neck through, FT body, maple cap and ebony board.

[BlackWidowESP]

A couple things I cooked up...

"ZERO" Custom Eclipse II
http://i190.photobucket.com/albums/z219/endrogeny/ZeroCustomEclipse.jpg

DiMarzio Super Dist. bridge, PAF Joe neck

Mahogany set-neck, Maple cap, full thickness body, ebony board.

Treva FR Custom Eclipse II

http://i190.photobucket.com/albums/z219/endrogeny/BlackenedEclipse.jpg

Can't decide what's in the bridge, SD Jazz in the neck

Mahogany neck through, FT body, maple cap and ebony board.

Absolutely fucking beast.

[MaskOfSanity]

:eek::eek::eek: nice!

[ZephMan13]

A couple things I cooked up...

"ZERO" Custom Eclipse II
http://i190.photobucket.com/albums/z219/endrogeny/ZeroCustomEclipse.jpg

DiMarzio Super Dist. bridge, PAF Joe neck

Mahogany set-neck, Maple cap, full thickness body, ebony board.

Treva FR Custom Eclipse II

http://i190.photobucket.com/albums/z219/endrogeny/BlackenedEclipse.jpg

Can't decide what's in the bridge, SD Jazz in the neck

Mahogany neck through, FT body, maple cap and ebony board.

Those look GREAT! is there anyway you could do my LP style request?
Honeyburst AAA flame top
Three Cream Humbuckers with cream pup rings
Ebony fingerboard 22 fret
tonepros nickel bridge and all nickel hardware
And lightning inlays (MOP)

[carbons2k]

in the zero eclipse Id make the bridge pickup red to kinda flow and look like the Japanese flag more and 2 bombs on the pick guard... one for Hiroshima and one for Nagasaki. otherwise I think it looks bad ass!

[db never]

http://i190.photobucket.com/albums/z219/endrogeny/ZeroCustomEclipse.jpg

I'd totally buy this guitar. Looks fantastic!

[gab4554]

^^ Nice muthafakin 4x3

but the headstock :x

[carbons2k]

yea Id use the traditional eclipse headstock

[Fikealox]

Just to be different, I like that headstock

[hessian101]

Just to be different, I like that headstock

I actually like It too... Very elegant looking.

[Moxley]

hey those guitars are from someones program. which is it? he has a website,m just cant remember which one.

[Rex Rocker]

blackmachine, if you'd please be so kind to mock me up this guitar:

- Horizon body, Forest headstock
- Glossy black finish
- Ebony fretboard, offset block inlays (like that Horizon FR posted above, except offset block on the 12th fret as well, no model name inlay).
- White binding throughout body, neck and headstock. White nut as well.
- Chrome tune-o-matic brige (string-thru-body), just one chrome volume knob, chrome tuners
- No logo on the headstock
- DiMarzio Super 3 bridge pickup (just flat black dimarzio bobbins with black polepieces) with chrome pickup ring, no neck pickup

Thanks!

[carbons2k]

pretty much a standard white Eclipse with ebony fretboard and eye of ra inlay. What do you think?

http://i44.photobucket.com/albums/f45/nemesys6/raeclipse.jpg

[carbons2k]

Kannon's zero custom I thinkered with it a bit (hope you dont mind)...

http://i44.photobucket.com/albums/f45/nemesys6/ZeroCustomEclipse.jpg

[BlackWidowESP]

Kannon's zero custom I thinkered with it a bit (hope you dont mind)...

http://i44.photobucket.com/albums/f45/nemesys6/ZeroCustomEclipse.jpg

Red pickup is ugly.

[NIN]

Style = M
Color= black
neck and bridge emg
Ebony board
Black floyd rose
pointed headstock, matching finish, reversed
black hard wear
white binding on the neck


for the custom part (two guitars, if you want to do both)
The "SIN" logo right behind the trem. and also as the inlay on the first fret
http://upload.wikimedia.org/wikipedia/en/3/39/Nin-sin-UK.jpg

For the other inlay, can i get the standard NIИ logo, from the 9th to the 15th fret

for the other, the NIИ logo just across the 12th fret.

Thank you

[Mr Walley]

http://i104.photobucket.com/albums/m198/xxjtmwxx/Guitars/EC-400ALBcopy-1.jpg

ECLIPSE-II ALB
Set-Neck
24.75” Scale
Full Thickness
Mahogany Body
Plain Maple 3/4" Cap
Maple Neck
Maple Fingerboard
42mm Ebony Nut
Thin U Neck Contour
22 XJ Frets
Black Hardware
Gotoh Vintage Tuners
String Through
Gotoh TOM Bridge
Seymour Duncan JB (B) /
Dimebucker (N) p.u.
Finish: Flat Clear

[Curt]

I am in the process of gathering materials for a random star build.so if you kindly could do so, give this a shot.body: random star finish:white fingerboard:ebony(no inlay)binding:black body and hs only hardware color:black bridge:kahler 7300 hybrid pickups: seymour duncan blackout (only one pup)control:volume knob only. also, the headstock should also be white(reversed jackson style please)

[Justinschut]

A dimebucker in the neck ?

Looks nice tho

[Curt]

I am in the process of gathering materials for a random star build.so if you kindly could do so, give this a shot.body: random star finish:white fingerboard:ebony(no inlay)binding:black body and hs only hardware color:black bridge:kahler 7300 hybrid pickups: seymour duncan blackout (only one pup)control:volume knob only. also, the headstock should also be white(reversed jackson style please)
Nevermind. did it myself except it has an emg. http://i399.photobucket.com/albums/pp74/thecurt91/untitled-14.jpg

[Curt]

now i just have to get the money for it.

[lucky13]

I have an Idea floating around right now. If someone could mock this up, I would be thankful.

F series body. MH headstock. Single EMG 81. String Through. Gold hardware. Sperzels

Olive Drab Green. Blank ebony board. Matching color on the headstock.

[Tyrimir]

I was wondering if somebody cold do a mock-up of:
http://www.bcrich.com/handcrafted/subpages/guitars/HSTL1515FMTG/imageLrg.jpg
and
http://www.bcrich.com/handcrafted/subpages/guitars/HCSSTLBK/imageLrg.jpg
But with this color http://www.ranguitars.com/gal1.php?z=329
If you have time for it that is:P been thinking about that color on a Stealth for some time. Either way thanks

[jaymz097]

I posted this in the General Forum:
I think I have decided to put my old ESP back together again. I am open for any ideas and mockups that are posted. I am leaning towards making it as Strat as possible. My ESP was purchased second hand in 1990. It was originally black and green snakeskin design on a heavy strat body. Maple neck with 22 fret scalloped rosewood fretboard. Jackson style headstock. Hum in the bridge, Single coil in the neck. I since have had the neck position routed for a hum also.
Here are pics and a few mockups I did. The last is what I want to do the most.
Any ideas and mockups are appreciated.

http://i101.photobucket.com/albums/m58/jaymz097/Espstrippedandsanded-1.jpg

http://i101.photobucket.com/albums/m58/jaymz097/48thST-Headstock.jpg

http://i101.photobucket.com/albums/m58/jaymz097/P1010136small-1.jpg

http://i101.photobucket.com/albums/m58/jaymz097/48thStGL56Mockup2copy.jpg

http://i101.photobucket.com/albums/m58/jaymz097/Espstrippedandsandedback-1.jpg

http://i101.photobucket.com/albums/m58/jaymz097/48UCESPsmcopy-1.jpg

http://i101.photobucket.com/albums/m58/jaymz097/Espstrippedandsandedcopy.jpg

[Casey K]

hey can you photoshop somethin for me?

m esp body
dean 30th finish
maple binding only on body
wilkinson crome trem
dime and a semore
1 vol, 1 3 way switch
birds eye maple neck
22 frets
night swan dots
bone nut
plane maple reverce komikozi head
crome tuners

[Svee]

Just for a giggle...
http://www.sveeart.co.uk/forumstuff/GhostbustersGuitar.jpg

sad thing is the more i look at it the more i want it lol :lol

[lucky13]

Svee, a redx custom would be awesome!! If I could see it.

[Curt]

I can see it. :\

[lucky13]

I can see it. :\

I couldn't see it when I first saw the post. That would be pretty cool to have. only difference I would make is that it was the Stay-Puft marshmallow man.

[Zach21]

:lol

[Casey K]

hey can you photoshop somethin for me?

m esp body
dean 30th finish
maple binding only on body
wilkinson crome trem
dime and a semore
1 vol, 1 3 way switch
birds eye maple neck
22 frets
night swan dots
bone nut
plane maple reverce komikozi 5 head, the gnarly one
crome tuners

yup

[xchumfiestax]

Please

Fixed

[Moxley]

K, i NEED this mockup, cause ESPManiac is makign this for me.

LES PAUL CUSTOM,
Silverburst finish.
PRS top carve, (even the recessed carve under the volume/tone knobs.)
Ebony Fretboard, 22 frets, Jackson Mark Morton Inlays!
Gibson headstock
i cant remember what binding it will have, so give it stock LPC binding.

Chrome hardware.


please and thank you!

[KirkRhoads]

This is also a realistic mock-up that most likely will happen:p

ESP MII

White with white reversed pointy headstock
Maple neck
EMG 81/81
Floyd Rose
GOLD hardware
and a pearloid pickguard:hat
controls - one volume and 3 way toggle

Cheers;)

[gab4554]

Here's your M-II Kirk Rhoads

http://i73.photobucket.com/albums/i233/unholyheart/M-1000_SW.jpg

After Ive done it I realize that the headstock logo was LTD if you want me to change it I will

[Curt]

oh dear god.....i'm in love. :lol

that m-II looks killer!

[KirkRhoads]

Thanks dude, but can you put on a MAPLE neck?;)

Im thinkin about refinishing my MII:)

[gab4554]

Thanks dude, but can you put on a MAPLE neck?;)

Im thinkin about refinishing my MII:)

You mean fingerboard?

[gab4554]

Here's the M-II with a maple board

http://i73.photobucket.com/albums/i233/unholyheart/M-1000_SWcopie.jpg

[KirkRhoads]

Shit!! Yeah, I meant fingerboard.. fuck, alcohol takes away braincells..:lol
Thanks dude! Saweet!

[Curt]

MINE........MINE..........MINE!!!!!!!!!!!!!!!

looks even better with maple!

[Fikealox]

Personally, I'd prefer a JEM that looks like an M2 over an M2 that looks like a JEM, but to each his own :)

[gibsonexp]

http://i510.photobucket.com/albums/s342/EJCruz123/ESPCustomGibsonEXP.jpg

Can I have this with a black body?

[gab4554]

^^See thru black??

[gibsonexp]

Yeah I would like to see the wood grain please.

[Rhymenocerous]

Quick and shitty job, but should give you a better idea.


http://i33.tinypic.com/m64qw.jpg

[gibsonexp]

That looks great, maybe a little darker?

[acefecoo]

darker...just a little bit :P
http://noob.hu/07/1124/fwdvwef.jpg
http://img125.imageshack.us/img125/5756/fwdvwefay2.jpg

the first 2 pix is completely the same...just on different servers

http://img56.imageshack.us/img56/6061/ecfsavsge8.jpg

[gibsonexp]

That is perfect, thanks so much.

[acefecoo]

you're welcome

[db never]

Just for a giggle...
http://www.sveeart.co.uk/forumstuff/GhostbustersGuitar.jpg

sad thing is the more i look at it the more i want it lol :lol


WIN!

[Moxley]

K, i NEED this mockup, cause ESPManiac is makign this for me.

LES PAUL CUSTOM,
Silverburst finish.
PRS top carve, (even the recessed carve under the volume/tone knobs.)
Ebony Fretboard, 22 frets, Jackson Mark Morton Inlays!
Gibson headstock
no binding ont he body or neck.
chrome pickups, black rings.
black/chrome tophat knobs, in the regular spot.

Chrome hardware.


please and thank you!


now updated. peeeees<3

[carbons2k]

Saw the eclipse and Totally fell in love with it. I would love to do that! How about an Ibanez 7 inspired by that eclipse?

http://i44.photobucket.com/albums/f45/nemesys6/ghostbustersRG.jpg

http://i44.photobucket.com/albums/f45/nemesys6/ghostbusters2copy.jpg

[Ruins Of Me]

I've made some mock-ups for the megadeth boards, if anyone wants me do some, i'll try.

Some examples:
http://img124.imageshack.us/img124/2969/077bi6.jpg

http://img294.imageshack.us/img294/6211/074og0.jpg
http://img141.imageshack.us/img141/6665/072sv5.jpg

I have many more, will post when i get home.

[KirkRhoads]

DAAAYUM!!!:eek::eek::eek::eek::eek:

[SA-WEET]

HOLY!:eek::eek::eek:

Doy you do Basses?

[cfhmachado]

hey blackmachine
could you put a fender style headstock on this guitar with the same figure and color scheme http://i183.photobucket.com/albums/x3/cfhmachado/ESPCustomCFHMachado.jpg
Thanks

Hey ruins can you mock this one up for me w/a charvel style headstock with the same figure and color on the headstock.

[Ruins Of Me]

HOLY!:eek::eek::eek:

Doy you do Basses?

No, i haven't made any basses, maybe with some spare time i might, what did you have in mind?

And as promised, more mock-ups:
http://img384.imageshack.us/img384/7953/007so3.jpg
http://img384.imageshack.us/img384/5913/015co5.jpg
http://img368.imageshack.us/img368/3012/024no8.jpg
http://img117.imageshack.us/img117/9260/028tf9.jpg
http://img376.imageshack.us/img376/6756/030mq8.jpg
http://img389.imageshack.us/img389/4418/001pj8.jpg
http://img187.imageshack.us/img187/7286/002xl0.jpg
http://img187.imageshack.us/img187/5701/009ry1.jpg
http://img389.imageshack.us/img389/2893/012pw2.jpg

I can combine all the parts i did, any headstock into any body, with several fretboards to choose.

[lucky13]

Ruins, what program is that?

[Ruins Of Me]

Ruins, what program is that?

Newtek's Lightwave3D!

[BeëlzeM]

I guess he's modelling in Maya or 3DSMax or whatever. Pretty timeconsuming.

EDIT: too late :p it's modelling 3d software though...

[Curt]

Ruins, you do some killer stuff!

[lucky13]

Newtek's Lightwave3D!

Sounds high dollar.

Can you do a Silverbust Horizon with top and back white and black binding on the body, white and black bindng on the neck and headstock. Block inlays, silver hardware, Sh-8 invader in the bridge and a '59 in the neck, and the MH headstock?


EDIT: forgot the sperzels and the LPC binding.

[Ruins Of Me]

Hey ruins can you mock this one up for me w/a charvel style headstock with the same figure and color on the headstock.

Charvel = Jackson or Charvel = Fender?

I wont be able to do that flame top exactly like that, but i'll try to make it close.

[BeëlzeM]

Ruins... any way you can do a quick ESP V mockup with the following specs?:

White pointy V like the Mustaine ESP DV8
String-thru
no pickguard
matching white headstock
pearloid binding around neck/headstock
dot inlays
some EMG's

[Curt]

Ruins checketh thine PM's.

[Gfunk]

http://img.photobucket.com/albums/v503/Gfunkhb175/phoenixsw.jpg





Put some black hardware on this pig.






:)

[Ruins Of Me]

http://img385.imageshack.us/img385/1811/083ip5.jpg

[Curt]

ooh, Looks nice! Ya checked the PM's yet Ruins? I got a couple requests.

[lucky13]

Ruins, that is fucking awesome!

[Curt]

this is the best I can do for mockups. (its all jacksons)

http://i399.photobucket.com/albums/pp74/thecurt91/skullkingv-1.jpg

and this is where I make em. because the JCF one won't let you do any but the rhoads now. http://www.liquidpixelshop.com/LPSCGG/LPSCustomGuitarGen.htm

[lucky13]

Curt.

[Curt]

Fail.

yes, I fail, I know. whatever dude. jesus. :rolleyes:

[lucky13]

yes, I fail, I know. whatever dude. jesus. :rolleyes:

the mockup fails, but the idea is fucking awesome!

[Curt]

Yea, but I can't afford to spend money on photoshop programs.
And I edited your post because it means the same thing. My name is synonymous with fail around this place.

[lucky13]

Yea, but I can't afford to spend money on photoshop programs.
And I edited your post because it means the same thing. My name is synonymous with fail around this place.

I know you edited my post. I was just gonna say the mockup blows, but would look good if done with the right program.

[Curt]

Well, yea. but I figured. hey why not correct it. Means the same thing. lol

If I could afford newtek lightwave 3d that'd look much better.

[lucky13]

Well, yea. but I figured. hey why not correct it. Means the same thing. lol

If I could afford newtek lightwave 3d that'd look much better.

Yeah.

Is it supposed to be an ESP?

[Curt]

Yep, it is.

[lucky13]

Yep, it is.

I can kinda see where you're going with it. The headstock is weird though. it's like a pale red.

[Curt]

Yea...It is the natural flame maple on there. It looks pale red though.

[lucky13]

Curt, I tried copying your mockup so let me know if it's close.

http://i239.photobucket.com/albums/ff201/fallen-zero-skater/CurtV.jpg

Just pretend the tuners are gold.

[Curt]

Yea, pretty close. wrong inlays though

I used the sharkseye.

[lucky13]

Yea, pretty close. wrong inlays though

I used the sharkseye.

:lol

That would turn out badass. But I would do the headstock in the black mathcing the body.

[Curt]

Eh, yea.

[lucky13]

Eh, yea.

:lol

Hopefully ruins can get ours.

[Curt]

haha. yea, he has that v, and the two versions of my charvel star copy to do.

[acefecoo]

Ruins Of Me you are a genious....
can you make a:
white F body,white neck,white head
6 strings,24frets
ebony fingerboard, no inlays
floyd rose, all black hardware (1 volume 1 tone 1 three way switch)
2 humbucker pickups

[Ruins Of Me]

Sounds high dollar.

Can you do a Silverbust Horizon with top and back white and black binding on the body, white and black bindng on the neck and headstock. Block inlays, silver hardware, Sh-8 invader in the bridge and a '59 in the neck, and the MH headstock?


EDIT: forgot the sperzels and the LPC binding.

http://img389.imageshack.us/img389/5859/085ci8.jpg
http://img71.imageshack.us/img71/206/084hf0.jpg

I haven't done all the details, cos i don't have much free time, but i hope this is ok for now.

[lucky13]

http://img389.imageshack.us/img389/5859/085ci8.jpg
http://img71.imageshack.us/img71/206/084hf0.jpg

I haven't done all the details, cos i don't have much free time, but i hope this is ok for now.

YOU FUCKER!

I gotta change my pants. BRB

That looks amazing dude. I can't wait to see it with the finishing touches.

[BeëlzeM]

Dude that's awesome. Anyway you can do my request sometime, the one about the V on the previous page? I would be interested in an ESP version or a Jackson with the same specs would be great too, whatever works.

[BrazilianBootyLover]

Please do mine lucky!


Mockup request!


M II body- quilted maple top, dark purple burst (fade to black on wings)

reversed headstock, quilted and paint to matching body


white pearl binding on body,neck and head

ebony fretboard with off set block inlays

Hipshot hardtail bridge,black

emg 81 bridge, 60 neck

one vol knob in tone position


3 way blade switch

ESP block logo in pearl

[lucky13]

Please do mine lucky!


Mockup request!


M II body- quilted maple top, dark purple burst (fade to black on wings)

reversed headstock, quilted and paint to matching body


white pearl binding on body,neck and head

ebony fretboard with off set block inlays

Hipshot hardtail bridge,black

emg 81 bridge, 60 neck

one vol knob in tone position


3 way blade switch

ESP block logo in pearl


BBL, Ruins did mine.

[Ruins Of Me]

http://img360.imageshack.us/img360/4226/086gd8.jpg
http://img187.imageshack.us/img187/6136/087dk4.jpg

[lucky13]

Ruins, how much does that program cost?

[BrazilianBootyLover]

Ruins can you do mine please?

[Ruins Of Me]

Ruins, how much does that program cost?

I don't know how much it costs now, but back when i bought it it was 2.5k € i think.
But i hope you realize that the program doesn't do anything on it's own, you'd have to learn how to model in 3d. I've been doing this for a long time, and actually used to model 3d buildings for a living. Not something worth getting into just to make mock-up guitars.

BTW, here's my website with more stuff http://skynet3d.planetaclix.pt/

I'm doing the requests in the order they were posted, if i miss anyone, please tell me.

And i'm not going to do the gibson firebird thing. It's too much work for a model i don't really care about just to change the hardware color. Anyone with photoshop skills can do that to that photo.

[lucky13]

Skynet!

[Curt]

Ruins, ya start on my star's yet?

[acefecoo]

have you started my white F ?

[Zach21]

Give the dude a break. You don't want to scare him off like Blackmachine.:p

[Curt]

eh, yea. I'll give him time.

[acefecoo]

Give the dude a break. You don't want to scare him off like Blackmachine.:p

hehe
true true

[ZephMan13]

http://img389.imageshack.us/img389/5859/085ci8.jpg
http://img71.imageshack.us/img71/206/084hf0.jpg

I haven't done all the details, cos i don't have much free time, but i hope this is ok for now.

now THOSE are block inlays!

[lucky13]

now THOSE are block inlays!

You comment on the inlays? Look at the whole picture. That thing is infuckingsane!

[Ruins Of Me]

now THOSE are block inlays!

Actually they're not, they're sharkeye inlays done with the same material, i cheated.

As to the other requests, they'll be done, this week might not make more because of the holidays.

In the mean time, what do think about my design. So far people either love it or hate it, so seems a bit controversial... But i might make the black one a reality some day.

http://skynet3d.planetaclix.pt/guitars/10.jpg
http://img257.imageshack.us/img257/1158/001iq3.jpg

[Zach21]

I like the top one better. Maybe with chrome hardware though. The shape isn't really for me, but it's cool that you created your own shape.

[lucky13]

They look good. I really liek the quilt on the top one.

[jaymerfortune]

http://img389.imageshack.us/img389/5859/085ci8.jpg
http://img71.imageshack.us/img71/206/084hf0.jpg

I haven't done all the details, cos i don't have much free time, but i hope this is ok for now.

minus floyd add kahler and we have a winner

[lucky13]

minus floyd add kahler and we have a winner

Or a tom and stop bar. :hat

[jaymerfortune]

Or a tom and stop bar. :hat

that would be nice too.

[lucky13]

that would be nice too.

It'll probably ordered that way after The custom shop gets out of the "Too Many Informashuns" phase

[Dingbat-Walabi]

shape: esp viper
Body color: black with these graphics (only the face, I don't want any of the text) http://img214.imageshack.us/img214/1130/dragoballzpicollocopybm8.jpg
neck/headstock binding: neon/glow in the dark green
headstock shape: ESP viper headstock
logo: ESP block, neon green
inlay: neon green dragonballs http://xoomer.alice.it/pgv/4star.jpg
fingerboard: ebony
pickups: EMG
pickup configuration: humbucker/none/humbucker
frets: 24
bridge: string-thru body
hardware color: black
tuners: locking tuners
neckthru body

[twiztedchild]

Actually they're not, they're sharkeye inlays done with the same material, i cheated.

As to the other requests, they'll be done, this week might not make more because of the holidays.

In the mean time, what do think about my design. So far people either love it or hate it, so seems a bit controversial... But i might make the black one a reality some day.

http://skynet3d.planetaclix.pt/guitars/10.jpg



Dude. What program do you use to make these?

[Zach21]

Why wouldn't you get the real Piccolo face on the guitar instead of that lame attempt at Piccolo?

[BeëlzeM]

http://img360.imageshack.us/img360/4226/086gd8.jpg
http://img187.imageshack.us/img187/6136/087dk4.jpg
Dude that's great man. Thanks a bunch!

[Xaladar]

To whoever can do it

Body Shape: PB
Body Color: See-through Black (Same on Headstock)
Headstock: H
Inlay: Dots (No ESP Logo)
Fingerboard: Rosewood
Pickups: EMG H/S/S
Frets: 24
Bridge: Stop Tailpiece/Tune-o-matic
Hardware: Chrome
Tuners: Gotoh, since I don't know what the difference is with any tuners except locking.
Set Neck

[Ruins Of Me]

Dudes, you'll have to give me a table with all these codes, what the hell is a PB body and a H headstock? :lol

[MyApocalypse]

Dudes, you'll have to give me a table with all these codes, what the hell is a PB body and a H headstock? :lol

http://espguitars.com/guitars.html

Scroll down and it lists all the different "series" with pics of the different models.

[acefecoo]

sorry for the codes :D
this is the F body
i want this but with white body and head without inlays
http://espguitars.com/images/guitars/F-250_BLK.jpg

[Xaladar]

Sorry bout that.
And "EMG H/S/S" is just "EMG Humbucker/Single/Single"

[Ruins Of Me]

Sorry bout that.
And "EMG H/S/S" is just "EMG Humbucker/Single/Single"

LOL That i knew, just some of the terms people use for ESP guitars confused me. I know more about Jacksons.

[lucky13]

Sorry bout that.
And "EMG H/S/S" is just "EMG Humbucker/Single/Single"

Do you want the cockstock or the new H headstock?

[SA-WEET]

Basically, a Byron Stroud Jazz Bass, With a Precision Body, and Vintage ESP Headstock. Without that 12th fret inlay. Just a block.

This one:
http://headbangersblog.mtv.com/wp-content/uploads/2007/05/strapping.jpg

[Xaladar]

I'm not a hundred percent on what the cockstock is, so, go with the new H headstock.

[SA-WEET]

I'm not a hundred percent on what the cockstock is, so, go with the new H headstock.

The Cockstock is the headstock on the Page Hamilton. Previously available on the Horizons.

Dear god, bring it back!

[Xaladar]

Ah, so definitely the new H.
I'm not crazy bout the cockstock.

[lucky13]

Ah, so definitely the new H.
I'm not crazy bout the cockstock.

You're not gay if you're crazy about the cockstock.

You're gay if you're crazy about the cock.

[ZephMan13]

You're not gay if you're crazy about the cockstock.

You're gay if you're crazy about the cock.

http://www.opaquelucidity.com/facepalm.jpg

[Blazer]

:lol

[lucky13]

I deserved that one.

[Dingbat-Walabi]

here's another from me

shape: this custom shape. it's a USA Alexi laiho guitar but with a shorter upper wing
http://img241.imageshack.us/img241/6761/espcustomshopxvjasonpanyg9.jpg
Body color: black with pearloid bevels
neck/headstock binding: white
headstock shape: ESP pointed
logo: ESP block
inlay: none
fingerboard: ebony
pickups: EMG
pickup configuration: humbucker/none/humbucker
frets: 24
bridge: string-thru body
hardware color: black
tuners: locking tuners
neck thru body

[Moxley]

K, i NEED this mockup, cause ESPManiac is makign this for me.

LES PAUL CUSTOM,
Silverburst finish.
PRS top carve, (even the recessed carve under the volume/tone knobs.)
Ebony Fretboard, 22 frets, Jackson Mark Morton Inlays!
Gibson headstock
no binding on the body or neck.
neck joint is contoured like the gibson neil schon model
chrome pickups, black rings.
black/chrome tophat knobs, in the regular spot.

Chrome hardware.


please and thank you!

still needed.

[ESPChris91]

Here's one I made for myself.
http://i41.tinypic.com/1h8ffb.jpg

[KH-M]

Body Shape: MX
Body Color: STBLK (same on headstock)
Headstock: Banana (whichever is used on the MX's)
Inlay: Diamond
Fingerboard: Rosewood
Pickups: EMG 81/85
Frets: 24
Bridge: Stop Tailpiece/Tune-o-matic
Hardware: Chrome
Tuners: Gotoh
neck-thru

[THOMSKI]

can someone do the following mockups:

STEF B-8 in snow white including the headstock, with a neck pickup instead of a middle pickup

An 8-string version of the Eclipse II in snow white including the headstock