View Full Version : My MX is now a year old
Now that the "new" has officially worn off, I think it's time to make some modifcations to my MX-2...to make it more like teh Jaymz. :lol
I ordered the following from Music123.com (at a discounted price, no less):
1 TonePros locking Tune-O-Matic & Stopbar set
1 EMG-60
1 set of Sperzel locking tuners
1 set of Schaller strap locks
While I wait for the parts to arrive (on Monday), I think I'll take my guitar apart this weekend and clean it up a bit. Here's a before photo:
http://i168.photobucket.com/albums/u167/dspear237/IMG_0344.jpg
Disassembly and re-assembly photos to come. :D
Guitarslingerans
05-09-2008, 10:01 AM
You're going to have to drill the old bridge post holes out to accept the new ones of the TonePros.
-Ans-
Metlupass2
05-09-2008, 10:43 AM
Doh!!
Gfunk
05-09-2008, 11:03 AM
You have had it for a year and you have not already done the prescribed modifications?
Git on da stik, sun.
tonyjh3
05-09-2008, 11:05 AM
James older Explorers had the same bridge thats on your MX now.
You could leave the old bridge on and kick it old school Hetfield.
You're going to have to drill the old bridge post holes out to accept the new ones of the TonePros.
-Ans-
Now that sucks. I suppose I could just attach the bridge and stopbar to the existing posts, no?
Gfunk
05-09-2008, 11:49 AM
Now that sucks. I suppose I could just attach the bridge and stopbar to the existing posts, no?
Nope, Tonepros bridges have large posts.
Drill that pig!
You have had it for a year and you have not already done the prescribed modifications?
Git on da stik, sun.
:lol What can I say, it's taken me a year of debating whether to leave the guitar stock or not. I'm OCD like that. In the end, however, I like the ease of changing strings with a locking bridge/stopbar/tuners set...not to mention the added sustain. The pickup and straplocks are the icing on the cake.
sean106OCD
05-09-2008, 02:37 PM
Use the tip Ans gave me with Sperzels. I do it to all my guitars now. Just take needle nose pliers, pop off the pin on the sperzel you would have to drill, line em up, and tighten them nicely. I have had not tuning or intonation problems what so ever doing this to a few guitars. (Thanks Ans :) )
Use the tip Ans gave me with Sperzels. I do it to all my guitars now. Just take needle nose pliers, pop off the pin on the sperzel you would have to drill, line em up, and tighten them nicely. I have had not tuning or intonation problems what so ever doing this to a few guitars. (Thanks Ans :) )
Yeah, the idea of drilling holes in the headstock certainly made me hold off on getting Sperzels installed for the longest time. Reading yours and Ans' threads made my decision to mod my guitar a lot easier. :D
smashandgrab1forme
05-10-2008, 04:58 AM
Use the tip Ans gave me with Sperzels. I do it to all my guitars now. Just take needle nose pliers, pop off the pin on the sperzel you would have to drill, line em up, and tighten them nicely. I have had not tuning or intonation problems what so ever doing this to a few guitars. (Thanks Ans :) )
I got a set yesterday, and I was going to do this but I cant see how the tuner is going to stay stable??
Prepping the patient for surgery:
http://i168.photobucket.com/albums/u167/dspear237/IMG_0389.jpg
Removed strings:
http://i168.photobucket.com/albums/u167/dspear237/IMG_0390.jpg
Removed bridge, stopbar, pickups:
http://i168.photobucket.com/albums/u167/dspear237/IMG_0391.jpg
Now to apply some ESP Jettgloss...
Microdomus
05-10-2008, 11:19 AM
Why?
Metfuk
05-10-2008, 03:34 PM
I like the ease of changing strings with a locking bridge/stopbar/tuners set...not to mention the added sustain.
I really doubt it will improve noticeably. IMO, the stuff like locking the bridge to posts to make it sound better is just invented by elitists who want a profit on their product. I'd never do any drilling to a guitar in the MX price range anyway. I bet there's tons of guitars out there that sustain better than most guitars with Tone Pros hardware fitted.
Sperzels without pins = win
Straplocks = win
EMG60 = win and very easy to swap
I really doubt it will improve noticeably. IMO, the stuff like locking the bridge to posts to make it sound better is just invented by elitists who want a profit on their product.
That's very possible. At a minimum, I like the fact that the stopbar won't slide off and scratch the finish when I remove all the strings to clean the fretboard. :p
smashandgrab1forme
05-10-2008, 08:47 PM
Fuck they are awesome looking guitars!!!!!!!!!!!!!!
Dingbat-Walabi
05-10-2008, 11:11 PM
what's jetgloss? :S
Metfuk
05-11-2008, 05:36 AM
At a minimum, I like the fact that the stopbar won't slide off and scratch the finish when I remove all the strings to clean the fretboard. :p
Yes, that's annoying indeed! But I always put tape on the stop bar and bridge when I do that. To make sure I don't fuck up the setup of the bridge.
what's jetgloss? :S
As it turns out, it's a foaming guitar polish (which works very well); came with my guitar case...along with picks, strings, and a t-shirt. :D
Metfuk
05-11-2008, 08:37 AM
As it turns out, it's a foaming guitar polish (which works very well); came with my guitar case...along with picks, strings, and a t-shirt. :D
Sick, where did you buy the MX?
Katana Guitars auction on eBay. Came without a case; had to order that for an extra $250.
Gfunk
05-11-2008, 11:55 AM
Have fun modding.
:)
Do you have a finish crack at the neck joint?
Metlupass2
05-11-2008, 05:32 PM
Katana Guitars auction on eBay. Came without a case; had to order that for an extra $250.
HOLY FUCK!!! Do you keep it in the case all the time cause I personally wouldn't spend that much. I got an Epiphone explorer case with my EXP and that does the job.
Metfuk
05-12-2008, 02:18 AM
I got an Epiphone explorer case with my EXP and that does the job.
Really? I thought the Gibby design didn't fit for ESP style Explorers.
frantic77
05-12-2008, 02:32 AM
Really? I thought the Gibby design didn't fit for ESP style Explorers.
Reply With Quote
in fact my Gibson explorer case didn't fit my JH-2.was just too small
HOLY FUCK!!! Do you keep it in the case all the time cause I personally wouldn't spend that much. I got an Epiphone explorer case with my EXP and that does the job.
Not really, I just HAD to have a case with this guitar and from I gathered here on the boards, there's none better than one made in Japan.
Have fun modding.
:)
Do you have a finish crack at the neck joint?
Thanks!
Nope. No finish cracks whatsoever; the guitar is nearly flawless.
Well, I received the parts for my MX (except the Sperzels which are on backorder :mad:). So far, I've installed the TonePros set...no modification/drilling required. Next I plan on installing the Schaller straplocks and the EMG-60. I'll post new pics tonight.
Metfuk
05-13-2008, 02:50 PM
Cool. Looking forward to it.
Where did you order the Sperzels? There are plenty of Sperzel sets on ebay...may have been quicker.
Music123.com. They are having a special promotion...the Sperzels ended up costing me $44. :D
Metfuk
05-13-2008, 03:34 PM
Music123.com. They are having a special promotion...the Sperzels ended up costing me $44. :D
Ah nice. On the bay they are like $50 to $60. Still fucking awesome when you compare it to Europe: Over here a set of Sperzels cost €90 which is the same as $140. :x
So I'm buying from ebay whenever I need some. :D
sean106OCD
05-13-2008, 03:41 PM
I get all my sperzels here for like 10 years....mad cool guy and does all sorts of cool colors and pearl shit.
http://www.tkinstruments.com/id75.htm
http://www.tkinstruments.com/409c14d0.jpg
Colors :0 (http://www.tkinstruments.com/sperzel_photos.htm)
tonyjh3
05-13-2008, 03:56 PM
Well, I received the parts for my MX (except the Sperzels which are on backorder :mad:). So far, I've installed the TonePros set...no modification/drilling required. Next I plan on installing the Schaller straplocks and the EMG-60. I'll post new pics tonight.
Which Tone Pros set did you use for your MX. I know there are a couple different set ups
depending on the style of bridge. Just curious since I may upgrade my black MX as well.
Which Tone Pros set did you use for your MX. I know there are a couple different set ups
depending on the style of bridge. Just curious since I may upgrade my black MX as well.
Metric set
Link (http://www.music123.com/TonePros-Metric-Locking-Tune-o-matic-Tailpiece-Set--large-posts--306142-i1128056.Music123)
TonePros set installed:
http://i168.photobucket.com/albums/u167/dspear237/IMG_0393.jpg
Schaller straplocks installed:
http://i168.photobucket.com/albums/u167/dspear237/IMG_0394.jpg
I get all my sperzels here for like 10 years....mad cool guy and does all sorts of cool colors and pearl shit.
http://www.tkinstruments.com/id75.htm
http://www.tkinstruments.com/409c14d0.jpg
Colors :0 (http://www.tkinstruments.com/sperzel_photos.htm)
Sweet! I'll have to keep them in mind should I decide to mod my other guitars.
tonyjh3
05-13-2008, 09:26 PM
Metric set
Link (http://www.music123.com/TonePros-Metric-Locking-Tune-o-matic-Tailpiece-Set--large-posts--306142-i1128056.Music123)
Damn, those won't work on my black MX. It's a 2003, and has the old style bridge where it's just a threaded post with no bushing where it goes into the body. That's probably why people thought you would need to drill out for the Tone Pros, they assumed you had the older style. My 2007 MX has the newer style bridge with the larger post/bushing where it goes into the body so the Tone Pros would be a drop in. Oh well, I guess I'll keep the old bridge. I just got through doing some mods to the black MX and I don't really want to tear it apart again just for the bridge. I'm really happy with it as is so I think I'll leave well enough alone. When you put the Sperzels in I recommend having someone fill the holes and respray the back of the headstock. It's usually not too expensive and you can still keep your serial number. I had mine done and the Sperzels look like they were factory installed. Good luck with all your mods man.
http://i237.photobucket.com/albums/ff233/tonyjh3/MX22.jpg
Sorry to hear about your MX bridge situation; perhaps the TonePros USA set would work instead, no? Thanks for the Sperzel installation advice, I'll have to look into that. The results are pretty sweet-looking. :D
tonyjh3
05-14-2008, 02:45 PM
Yeah with the old style posts I think you're pretty much stuck with drilling
them out to accept the Tone Pros posts. Not a big deal, the stock bridge
works fine and the black MX is killer sounding, so I figure if its not broke
don't fix it.
Sperzel tuners received and installed:
http://i168.photobucket.com/albums/u167/dspear237/IMG_0397.jpg
http://i168.photobucket.com/albums/u167/dspear237/IMG_0395.jpg
Mods complete; ready to restring, tune, and intonate. :D
http://i168.photobucket.com/albums/u167/dspear237/IMG_0396.jpg
By the way, if anyone is interested...I have an EMG-81 and black Gotoh tuners, strap buttons, stopbar, and tune-o-matic bridge that I no longer need. Feel free to PM me with any offers.
:)
Metfuk
05-16-2008, 07:11 AM
Fuck, your Sperzels are not staggered! I'd love to have non staggered ones too.
It's pretty stupid that the standard sets are always staggered, just to make them fit on Fender type guitars. :x I only have angled headstock guitars, so fuck staggered tuners!
Pushead
05-16-2008, 07:19 AM
I get all my sperzels here for like 10 years....mad cool guy and does all sorts of cool colors and pearl shit.
Colors :0 (http://www.tkinstruments.com/sperzel_photos.htm)
After ordering my last set through them, I found out the Sperzel factory is about 20 minutes from my house. :lol A lady called and asked if I wanted to come pick them up. I guess they have some of their coloring process stuff done at a shop right around the corner from me.
I believe you can order a Tone Pros locking bridge to replace and ABR-1 style. I seem to remember seeing one when I bought my last one.
Fuck, your Sperzels are not staggered! I'd love to have non staggered ones too.
It's pretty stupid that the standard sets are always staggered, just to make them fit on Fender type guitars. :x I only have angled headstock guitars, so fuck staggered tuners!
http://www.music123.com/Sperzel-6-In-Line-Non-Graduated-Tuners-361010-i1129884.Music123
Cheers!
After ordering my last set through them, I found out the Sperzel factory is about 20 minutes from my house. :lol A lady called and asked if I wanted to come pick them up. I guess they have some of their coloring process stuff done at a shop right around the corner from me.
I believe you can order a Tone Pros locking bridge to replace and ABR-1 style. I seem to remember seeing one when I bought my last one.
That's pretty convenient. :lol
Metfuk
05-16-2008, 08:34 AM
http://www.music123.com/Sperzel-6-In-Line-Non-Graduated-Tuners-361010-i1129884.Music123
Cheers!
Pretty cool. I know they exist, but it doesn't seem to be a standard feature, which is a shame.
Pretty cool. I know they exist, but it doesn't seem to be a standard feature, which is a shame.
No kidding, I ordered a set for my Gibson Explorer a few years ago and didn't discover that they were staggered until AFTER I had finished drilling holes for the set pins. :mad: At the time, I was unable to find a non-staggered set of Sperzels and ended up putting the Grovers back on the Explorer. :rolleyes:
Metfuk
05-16-2008, 10:14 AM
No kidding, I ordered a set for my Gibson Explorer a few years ago and didn't discover that they were staggered until AFTER I had finished drilling holes for the set pins. :mad: At the time, I was unable to find a non-staggered set of Sperzels and ended up putting the Grovers back on the Explorer. :rolleyes:
Ah.
Well I have Sperzels on my handbuilt Explorer that is nearly finished and they are staggered. It works, but a non staggered set would look nicer of course.
smashandgrab1forme
05-16-2008, 02:08 PM
Ah.
Well I have Sperzels on my handbuilt Explorer that is nearly finished and they are staggered. It works, but a non staggered set would look nicer of course.
Post pics of said explorer8o
Gfunk
05-17-2008, 03:55 AM
http://i168.photobucket.com/albums/u167/dspear237/IMG_0395.jpg
Nice rosewood.
;)
sean106OCD
05-17-2008, 05:23 AM
Show should slap one of these on there. Here is one I put on my MXII-CTM ;)
My Sperzels came staggered, but I never asked when I listed out my wants on the custom form :(
http://seanmckenna.server101.com/INDEX-March-2008/DSC00880.JPG
http://seanmckenna.server101.com/INDEX-March-2008/DSC00881.JPG
http://seanmckenna.server101.com/INDEX-March-2008/DSC00903.JPG
Metfuk
05-17-2008, 09:16 AM
Post pics of said explorer8o
I don't have pics of the latest situation, but here it is:
http://i154.photobucket.com/albums/s252/MVHRockbox/IMG_1001.jpg
http://i154.photobucket.com/albums/s252/MVHRockbox/IMG_1000.jpg
More pics will come when it's finished.
The body is exactly the same (bought from the same seller) as Pusheads KL copy. I wanted the ESP body shape and this was the only way to go. I decided to build a neck myself rather than buy a pre-fab one. So far it's turning out great!
http://i168.photobucket.com/albums/u167/dspear237/IMG_0395.jpg
Nice rosewood.
;)
Yeah, it sure does look like rosewood...but it is definately ebony. ;)
Show should slap one of these on there. Here is one I put on my MXII-CTM ;)
My Sperzels came staggered, but I never asked when I listed out my wants on the custom form :(
http://seanmckenna.server101.com/INDEX-March-2008/DSC00880.JPG
http://seanmckenna.server101.com/INDEX-March-2008/DSC00881.JPG
http://seanmckenna.server101.com/INDEX-March-2008/DSC00903.JPG
Y'know I just might have to get a hold of one of those truss rod covers. Not sure yet, tho. :)
Metfuk
05-17-2008, 11:09 AM
Sweet pics there, Met.
Thanks!
Microdomus
05-17-2008, 12:05 PM
^^Cool! What colour are you going for?
Metfuk
05-17-2008, 01:15 PM
^^Cool! What colour are you going for?
Natural by oil. No gloss finishes. Can't wait to see the results. I think the body is gonna look a lot nicer with the oil applied.
Microdomus
05-17-2008, 02:24 PM
^^Good choice! The oil will definetly enhance the figuring of the wood, and that always nice! adding wax to? Had a body like that too a while ago, but didn`t find the time to complete it so I just sold it.
Now...Alder body, and a Maple bolt on neck w/rosewood fretboard? How will that combo sound I ponder...
smashandgrab1forme
05-17-2008, 02:54 PM
That looks hot Metfuk!!!!!!!!!!!! Congratulations!!!!!!!!!!
Pushead
05-17-2008, 04:44 PM
Now...Alder body, and a Maple bolt on neck w/rosewood fretboard? How will that combo sound I ponder...
TjbWnjxq2qs
smashandgrab1forme
05-17-2008, 07:38 PM
^
Id say it sounds like an awesome combo!!!!!
Gfunk
05-18-2008, 05:10 AM
Yeah, it sure does look like rosewood...but it is definately ebony.
Sure it is.
;)
Metfuk
05-18-2008, 02:08 PM
^^Good choice! The oil will definetly enhance the figuring of the wood, and that always nice! adding wax to? Had a body like that too a while ago, but didn`t find the time to complete it so I just sold it.
Now...Alder body, and a Maple bolt on neck w/rosewood fretboard? How will that combo sound I ponder...
Thank you.
The fretboard is Ebony. The maple neck and ebony was adviced to me by an experienced luthier. He said it would sound too muddy with a mahogany neck. Also, I'm not adding EMG's but passive Duncans, a Distortion in the bridge and 59 in the neck. I've tried the set in another guitar temporarly and I didn't really dig the Distortion humbucker. It sounded too harsh in that guitar. If I don't like the duncans I will put in EMG's, because I have some laying around here too. But first I wanna try the Duncans because that was what I originally intended. Other guitar = new chances.
That looks hot Metfuk!!!!!!!!!!!! Congratulations!!!!!!!!!!
Thank you sir!
EDIT:
Some more recent pics. With frets this time. I had the nut, TRC and tuners lined up to get an impression of the whole thing.
BTW, my headstock veneer is Rio Rosewood. It's very rare, but it looks amazing! And smells wonderfull!
http://i154.photobucket.com/albums/s252/MVHRockbox/IMG_1038.jpg
http://i154.photobucket.com/albums/s252/MVHRockbox/IMG_1042.jpg
http://i154.photobucket.com/albums/s252/MVHRockbox/IMG_1030.jpg
It's pretty close to being finished (I think :P). I still have to level and dress all the frets, sand the whole thing to final beauty and smoothness, get the electronics done (easy) and than apply the oil. I'm so excited it's almost done now.
smashandgrab1forme
05-19-2008, 01:16 AM
:eek::eek::eek::eek::eek::eek:
did you make the neck yourself??????
That is hot dayum!!!!!!!!!!!:cool:
Metfuk
05-19-2008, 01:32 AM
:eek::eek::eek::eek::eek::eek:
did you make the neck yourself??????
That is hot dayum!!!!!!!!!!!:cool:
Yes I've made it completely myself. :)
Thanks again!
smashandgrab1forme
05-19-2008, 01:35 AM
awesome man, utter win right there
Gfunk
05-19-2008, 03:37 AM
http://i154.photobucket.com/albums/s252/MVHRockbox/IMG_1030.jpg
Looks like my filing cabinet. So you are veneering the headstock but not the body? Supwitdat?
:confused:
Pushead
05-19-2008, 05:09 AM
Yeah, that looks sort of strange.
Microdomus
05-19-2008, 07:06 AM
I think you should add a veneer top in Rio Rosewood on the guitar as well. If not I have to agree with Pus n`Funk...
Metfuk
05-19-2008, 09:09 AM
I think you should add a veneer top in Rio Rosewood on the guitar as well. If not I have to agree with Pus n`Funk...
That would be cool but it's gonna be a ton of work! And I don't even know if I'd like the sound of the alder body. So we'll see how it'll sound. If it sucks, I'm gonna make a mahogany body for it and I may reconsider doing a body veneer too.
gainiac
05-21-2008, 07:41 AM
Hetfield's original white Gibson explorer was alder body with maple neck and ebony board...like most stock 1984 explorers were.
Metfuk
05-21-2008, 02:46 PM
Hetfield's original white Gibson explorer was alder body with maple neck and ebony board...like most stock 1984 explorers were.
Really? I knew they had maple necks but alder body? Never heard of it.
What also surprised me:
There was a JH-2 on ebay some weeks back and the seller claimed that the body was made of alder. I thought it was mahogany! :eek:
Brian
05-22-2008, 08:16 AM
Looks like my filing cabinet. So you are veneering the headstock but not the body? Supwitdat?
The first thing I thought was it looks like my old Sauder Desk. Man, that thing took me FOREVER to put together.
http://www.sauder.com/images/product/normal/Executive_Desk_7344-105_1.jpg
DeanFromHell
05-23-2008, 01:16 AM
Hello Metfuk,
Your from Holland right? If that's the case.. please PM me your MSN adress cause I need to talk to you about that explorer :eek:
DeanFromHell
05-23-2008, 01:17 AM
BTW, I've been lurking on this forum for like a year now, but I finally decided to post something :lol
DyersEve87
05-25-2008, 04:13 PM
Het MetFuk, do you sell those bodies on the bay? I bought one of those a long time ago off there from a guy that makes them and constantly sells them on there
DyersEve87
05-25-2008, 04:16 PM
http://img207.imageshack.us/img207/6573/geetir001wg4.jpg (http://imageshack.us)
http://img502.imageshack.us/img502/3307/geetir005wo6.jpg (http://imageshack.us)
http://img502.imageshack.us/img502/3307/geetir005wo6.3e0bc4226d.jpg (http://g.imageshack.us/g.php?h=502&i=geetir005wo6.jpg)
I did the finish myself using Urethane,EMG 60/81, gotoh tune-a-matic, and stopbar tailpeice, schaller straplocks,the neck is on it's way as we speak..:D
Metfuk
05-26-2008, 05:34 AM
Het MetFuk, do you sell those bodies on the bay? I bought one of those a long time ago off there from a guy that makes them and constantly sells them on there
No I don't sell. I've bought my body from some ebayer.
I'd have loved to get a mahogany body but they didn't have one. Yours looks great! But judging from what I see in the pic, it also isn't mahogany?
Yesterday I've had my Explorer stringed up for the first time so I could finally play it over an amp and hear how it sounds. It's interesting, but it can't touch my Gibson in heaviness and warmth (both are in E standard). It does play nicely, even though it isn't even set up.
One thing that bothers me is the thickness of the neck. I wanted a thin U shape. So a bit less thick than a Gibson. But I guess something went wrong somewhere down the road, because it's even fatter than a Gibson now! :x I like my Gibson neck, but this handbuilt one is too fat for my taste. I guess I'm gonna fix it, otherwise I'm not really gonna enjoy it as much as I'd want to. :\
DyersEve87
05-26-2008, 10:58 AM
No I don't sell. I've bought my body from some ebayer.
I'd have loved to get a mahogany body but they didn't have one. Yours looks great! But judging from what I see in the pic, it also isn't mahogany?
Yesterday I've had my Explorer stringed up for the first time so I could finally play it over an amp and hear how it sounds. It's interesting, but it can't touch my Gibson in heaviness and warmth (both are in E standard). It does play nicely, even though it isn't even set up.
One thing that bothers me is the thickness of the neck. I wanted a thin U shape. So a bit less thick than a Gibson. But I guess something went wrong somewhere down the road, because it's even fatter than a Gibson now! :x I like my Gibson neck, but this handbuilt one is too fat for my taste. I guess I'm gonna fix it, otherwise I'm not really gonna enjoy it as much as I'd want to. :\
thanks man!Yeah we must have bought the body from the same guy, i was really surprised with the overall quality of the craftsman ship, the only thing was the volume knob hole is too close to the stop bar, on the actual MX its a little further away from it. And yes the body is alder i wanted mahogany but i had no other choice, i recently got lucky and found an ESP Custom MX neck on the bay in excellent condition, it is mahogany and as far as an alder body and mahogany neck i have heard bad things from a few people on here as far as it sounding too muddy, but all that really comes down to your amp and setup so im not to o worried. but i have to compliment you on your work, the neck looks awesome, good luck on fixing the fatness
Metfuk
05-26-2008, 11:58 AM
Thanks! You have some fun too with your project :D
smashandgrab1forme
05-27-2008, 02:25 AM
http://img207.imageshack.us/img207/6573/geetir001wg4.jpg (http://imageshack.us)
http://img502.imageshack.us/img502/3307/geetir005wo6.jpg (http://imageshack.us)
http://img502.imageshack.us/img502/3307/geetir005wo6.3e0bc4226d.jpg (http://g.imageshack.us/g.php?h=502&i=geetir005wo6.jpg)
I did the finish myself using Urethane,EMG 60/81, gotoh tune-a-matic, and stopbar tailpeice, schaller straplocks,the neck is on it's way as we speak..:D
:eek::eek::eek::eek::eek::eek:
That looks hot man!!!!!!!!! Post more pics with the neck
DyersEve87
05-27-2008, 06:12 AM
:eek::eek::eek::eek::eek::eek:
That looks hot man!!!!!!!!! Post more pics with the neck
Thanks a lot man!! It feels good to hear that after the months ive been working on it, i will definitely post more pics with the neck.
vBulletin® v3.8.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.